Haier WQP12-PHS User Manual - Page 2

Energy Saving Tips, How to Keep Your Dishwasher in Shape, Wash Cycle Table

Page 2 highlights

Energy Saving Tips - It is important to try and run the dishwasher when it is fully loaded to save on enery. In order to prevent odors from forming and food from caking onto the dishes, you can run the hold cycle. - Choose the right wash cycle: the choice of cycle depends on the type of dishware, cookware and utensils being washed and how dirty they are. - Use the right amount of detergent: if you use too much detergent, the result will not be cleaner dishes,but,rather,a greater nega tive impact on the enviroment. - There is no untility in rinsing dishes ,cookware and untensils before placing them in the dishwasher. How to Keep Your Dishwasher in Shape After Every Wash After every wash, turn off the water supply to the appliance and leave the door slightly ajar so that moisture and odors are not trapped inside. Moving the Appliance If the appliance must be moved, try to keep it in the vertical position. If absolutely necessarty, it can be positioned on its back. Remove the Plug Before cleaning or performing maintenance, always remove the plug from the socket. Do not run risks. Seals One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals. Periodic cleaning with a sponge will prevent this from occuring. No Solvents or Abrasive Cleaning Products To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Rather, use only a cloth and warm soapy water. To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little white vinegar, or a cleaning product made specifically for dishwasher. When You Go on Holiday When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty and then remove the plug from the socket, turn off the water supply and leave the door of the appliance slightly ajar. This will help the seals last longer and prevent odors from forming within the appliance. Wash Cycle Table Cycle Cycle Selection Information Heavy Duty Very dirty dishes, pots and pans. (not to be used with delicate items) Normal Wash IEC-EN 50242 Normally dirty dishes, pots and pans. Standard daily cycle. For dishes that need to be rinsed and dried only. Rinse Soak Pre-wash of dishes, pots and pans while waiting for the load to be conmpleted after the subsequent meal. Description of Cycle Detergent Rinse Aid Pre-wash with hot water at 50 . Extended wash at 55 Rinse with cold water. 30g ¡ Rinse with hot water at 60 Drying. Extended wash at 55 Rinse with cold water. Rinse with hot water at 60 Drying. 30g ¡ Rinse with cold water. Rinse with hot water at 60 ¡ Drying. Short cold wash to prevent food residue from drying on the dishes. .7. GB GB .8.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

¡
¡
¡
.7.
.8.
-
It is important to try and run the dishwasher when it is fully
loaded to save on enery. In order to prevent odors from forming
and food from caking onto the dishes, you can run the hold cycle.
- Choose the right wash cycle: the choice of cycle depends on
the type of dishware, cookware and utensils being washed and
how dirty they are.
Energy Saving Tips
- Use the right amount of detergent: if you use too much detergent,
the result will not be
cleaner dishes,but,rather,a greater nega
tive
impact on the enviroment.
- There is no untility in rinsing dishes ,cookware and untensils
before placing them in the dishwasher.
How to Keep Your Dishwasher in Shape
After Every Wash
After every wash, turn off the water supply to the appliance and
leave the door slightly ajar so that moisture and odors are not
trapped inside.
Remove the Plug
Before cleaning or performing maintenance, always remove the
plug from the socket. Do not run risks.
No Solvents or Abrasive Cleaning Products
To clean the exterior and rubber parts of the dishwasher, do not
use solvents or abrasive cleaning products. Rather, use only a
cloth and warm soapy
water.
To remove spots or stains from the surface of the interior, use a
cloth dampened with water and a little white vinegar, or a clean-
ing product made specifically for dishwasher.
When You Go on Holiday
When you go on holiday, it is recommended that you run a wash
cycle with the dishwasher empty and then remove the plug from
the socket, turn off the water supply and leave the door of the
appliance slightly ajar. This will help the seals last longer and pre-
vent odors from forming within the appliance.
Moving the Appliance
If the appliance must be moved, try to keep it in the vertical position.
If absolutely necessarty, it can be positioned on its back.
Seals
One of the factors that cause odors to form in the dishwasher is
food that remains trapped in the seals. Periodic cleaning with a
sponge will prevent this from occuring.
Wash Cycle Table
Cycle
Cycle Selection
Information
Description of Cycle
Detergent
Heavy Duty
Normal Wash
IEC-EN 50242
Rinse
Soak
Very dirty dishes, pots and
pans. (not to be used with
delicate items)
Normally dirty dishes, pots
and pans. Standard daily
cycle.
For dishes that need to be
rinsed and dried only.
Pre-wash of dishes, pots and
pans while waiting for the load
to be conmpleted after the
subsequent meal
.
Pre-wash with hot water at 50
.
Extended wash at 55
Rinse with cold water.
Rinse with hot water at 60
Drying.
Short cold wash to prevent
food residue from drying on
the dishes.
30g
30g
GB
GB
Extended wash at 55
Rinse with cold water.
Rinse with hot water at 60
Drying.
Rinse with cold water.
Rinse with hot water at 60
Drying.
Rinse Aid