Haier XPB60-CS User Manual - Page 8

Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Before using , hang up the drain hose on suitable location. Do not put down the drain hose on the ground. 0.8m H 1.2m 4.Slanting or uneven ground may result in unstable working or abnormal noise. Please make the machine stand horizontally. Pay attention to the following before washing the laundries Check if the laundries has special washing instructions. Clear the Tie the pocket. Take long strips; out the coins, fasten sand, hairpins the etc. buttons; close zippers. The quantity of the laundries shall not be too large. Stretch and loosen the laundries before putting them in the tub. When the pulsator is running , the buttons of the laundries may cause noise. For the sake of discretion, please put the laundries with buttons into other laundries. a. Check if the laundries are applicable for washing with machine. b. Divide the laundries that are not colorfast from other laundries. c. Put those laundries difficult to absorb water into water with hand. d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil, please apply detergent on them in advance, which can make it easier to remove the soil. e. For those laundries that may get lint ball and those with long fur, turn it over before putting in. f. Do not put those laundries polluted by chemicals into the washing machine directly. 6