Haier XQB55-10H User Manual - Page 18
Trouble shooting, Answer to question - choke
View all Haier XQB55-10H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Trouble shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena Buzzing upon reservation starts, Nixie tube indicates "E0" No or slow drain, nixie tube indicates "E1" , buzzing. Running pauses during spin, nixie tube indicates "E2", buzzing Safety switch actuates, not spin, (after self-correction twice), nixie tube displays "E3", buzzing No or slow water filling (not reaching the level in 15 min), nixie tube indicates "E4", buzzing Poor or no waterfall flow The machine does not act Not wash Not spin There's abnormal sound inside the machine The water faucet leaks The reason The top lid is not closed Is the drain hose put down? Is the drain hose blocked by foreign material? The top cover leaves open Are the laundries put slantingly? Is the machine slanting? The water tap is not open The water inlet valve is blocked The water pressureis too low and the current is too small If the nozzle is choked with foreign bodies Is there power failure? Is the power plug loose? Does the water level arrive at the set water level? Is the power plug loose? Is the top lid closed? Are the laundries put orderly? Is the machine slanting? Are the laundries slanting in spinning? Is the jointer screw of the water inlet hose is loose or twisted awry? How to settle Close the top lid Put down the drain hose. Open and close the top lid once. Clean the foreign material. Open and close the top lid once. Close the top lid Re-order the laundries. Closethe top lid.Level the machinein right position. Open and close thetop lid once. Open the water tap.Push the "Start/Pause" button. Clean the water inletvalve. Push the "Start/Pause" button. Wait for the normal water pressure Before use. Remove the foreign bodies Use it when the power is on. Insert the power plug tightly. Affusion to the set water level. Insert the power plug tightly. Close the top lid Put the laundries orderly. Level the machine properly. Re-order the laundries. Fasten the jointer screw properly. 16