Hamilton Beach 04162 Use And Care - Page 6
How to Assemble and Use - hepa filter
View all Hamilton Beach 04162 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
840115900 ENv00.qxd 6/6/03 9:03 AM Page 6 How to Assemble and Use IMPORTANT: Your Hamilton Beach air purifier is designed for easy use and maintenance. Make sure that the UV bulb, HEPA filter, and carbon pre-filter are properly installed before use. Before First Use Be sure to remove all packing materials. The filters and UV bulb are packed in plastic bags inside the air purifier for shipping. Refer to pages 7 to 9 for unpacking and installation instructions. Selecting the Proper Location To prevent the risk of personal injury or damage to the air purifier and provide the best possible performance of your air purifier, follow the placement guidelines below: DO: • Place the air purifier on a flat, stable surface. DO NOT: • Do not stand, sit, or place any objects on the air purifier. It is not designed to support additional weight. • Place the air purifier near an electrical outlet where it is out of the way. Make sure that the air purifier and the cord do not present tripping hazards. • Select a central location with adequate air circulation. • Turn off and unplug the air purifier before moving or servicing it, or if it will not be used for several days. • Route the electrical cord clear of furniture to prevent damage from pinching. • Do not block the air intake and outlet grilles with drapes, curtains, or blinds. This may cause reduced performance. • Do not use in a kitchen, garage, or area with grease, oil or chemicals such as solvents or insecticides. • Do not place on or near heat sources such as stoves, radiators, or heaters, or in direct sunlight. • To reduce electrical noise and interference, do not place on or near, or plug into the same outlet as TVs, baby monitors, or cordless phones. 6