Hamilton Beach 14015 Use & Care - Page 4
To Dry Iron, To Steam Iron, Fabric Care Label Symbols
View all Hamilton Beach 14015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
840182701 ENv02.qxd:840144500 Ev02.qxd 2/4/11 3:28 PM Page 6 Fabric Care Label Symbols Fabric care labels on garments have symbols that show ironing instructions and recommended temperature settings. These symbols are shown below along with their meaning. Iron High Temp Med Temp Low Temp Do Not Do Not Setting Setting Setting Iron Use Steam DRY IRON: Synthetics, Silk/Wool (reverse side of fabric) STEAM IRON: Cotton (while damp; use steam or spray) Linen (while damp on reverse side of fabric) NOTE: To prevent possible garment damage, we do not recommend ironing fabrics labeled "Dry Clean Only." To Dry Iron 1. Plug the iron into outlet. 2. Set Adjustable Steam Control to 0 (Dry Iron). 3. Turn Temperature Control Dial to desired temperature. Allow 2 minutes for iron to reach desired temperature. 4. To turn iron off, turn Temperature Control Dial to OFF and unplug iron. To Steam Iron 1. Unplug iron. Set Adjustable Steam Control to 0 (Dry Iron). Hold iron with soleplate parallel to the ground. 2. Using a cup, slowly pour tap water into water fill opening until MAX fill line is reached. Do not fill iron directly from the faucet. 3. Plug iron into outlet. 4. Turn Temperature Control Dial to desired fabric setting in the steam range. 5. Allow 2 minutes for the iron to reach desired temperature. 6. Set Adjustable Steam Control to desired steam setting. 7. To turn iron off, set Set Adjustable Steam Control to 0 (Dry Iron). Turn the Temperature Control Dial to OFF. Unplug iron. 8. Empty water from the iron following directions in "Care and Cleaning." Water: Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron. 6 7