Hamilton Beach 14350 Use & Care - Page 4

840164201 ENv03.qxd 10/11/07 11:15 AM Page 6 To Dry Iron 1. Plug in iron. 2. Turn Adjustable Steam to the Dry Iron position. 3. Set Temperature Settings to desired temperature. With iron in an upright position, allow 3 minutes for iron to reach desired temperature. Do not preheat iron with soleplate facing down. 4. To turn iron off, set Temperature Settings to OFF ( O ). The iron may be turned off by pressing the Temperature Setting Button for 3 seconds. To Steam Iron 1. Unplug iron. Open Water Tank Fill Cover. Using a cup, slowly pour 6 ounces (3⁄4 cup) of tap water into the water tank opening. Close Water Tank Fill Cover. 2. Plug in iron. 3. Set Temperature Settings to desired setting in steam range. With iron in an upright position, allow 3 minutes for iron to reach desired temperature. Do not preheat iron with soleplate facing down. 4. Set Adjustable Steam to desired steam output. 5. To turn off, turn Adjustable Steam to Dry Iron. Set Temperature Settings to OFF ( O ). (Iron may also be turned off by pressing Temperature Setting Button for 3 seconds.) 6. Empty water from the iron following directions in "Care and Cleaning." Water Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron. 6 Features (on selected models) Adjustable Steam Provides minimum steam for wool or maximum steam for linen. Set the dial to to change to Dry Iron. Steam and Spray Buttons Push Steam Button for an extra blast of steam. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen. Steam Spray Retractable Cord 1. Pull cord to desired length. Do not unwind cord beyond colored tape indicator on cord. 2. To store cord, press and hold the Cord Release Button while guiding the cord into the storage area. WARNING! To reduce the risk of an eye injury, hold the plug while retracting the cord. 7