Hamilton Beach 14865 Use & Care - Page 4
Power On Light, Auto Shutoff Status Indicator and, Reset Button
UPC - 040094148653
View all Hamilton Beach 14865 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
840125000 ENv01.qxd 12/14/04 3:04 PM Page 6 Features (on selected models) Automatic Steam Provides the correct amount of steam for the fabric selected. Set Temperature Control to the number that matches the number on the Fabric Setting Chart. Blast of Steam and Spray Buttons Push Blast of Steam Button for an extra blast of steam. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen. Spray Steam Power On Light Models that do not have the automatic shutoff and the reset button, do have a power light. This light comes on when the iron is plugged in. The light will remain on even if the Temperature Control is turned to OFF ( O ). The light will stay on until iron is unplugged. 6 Power On Light Features (continued) Auto Shutoff Status Indicator and Reset Button If the iron is an Automatic Shutoff model, the light comes on when the iron is first plugged in. After 1 hour the iron will shutoff and the light will go out. Push the Reset Button to turn the iron back on for another hour of ironing. Auto Shutoff Status Indicator Reset Button Vertical Steam 1. Follow Steps 1 through 3 in "To Steam Iron." 2. Hang garment in a location that is not susceptible to damage from heat or moisture. Do not hang in front of wallpaper, window, or mirror. 3. Hold iron about 6 inches away from garment and press and release the Blast Button to steam out wrinkles. Do not press Blast Button more than once every 2 seconds. 4. To turn iron off, turn Temperature Control to OFF (O). Unplug iron. 5. Empty water from the iron following directions in "Caring for Your Iron." NOTE: Do not allow hot soleplate to touch delicate garments. 7