Hamilton Beach 14890 Use & Care - Page 5

840159500 Ev02.qxd 4/2/07 2:28 PM Page 5 Features (continued) Power On Light The Power On light comes on when the Power On Light iron is first plugged in, and will remain on until the iron is unplugged. The light will stay on, even if Fabric Setting Indicator is OFF. Auto Shutoff The iron will shut off after 1 hour and the indicator box around 5 LINEN 4 COTTON 3 RAYON OFF in the Fabric Setting indicator will 2 POLYESTER blink on and off. 1 SILK OFF Press the Temperature Selector to turn the iron back on for another hour of ironing. Temperature Selector Retractable Cord 1. Pull cord to desired length. Do not unwind cord beyond colored tape indicator on cord. 2. To store cord, press and hold the Cord Release Button while guiding the cord into the storage area. w WARNING: To reduce the risk of an eye injury, hold the plug while retracting the cord. Vertical Steam 1. Follow Steps 1 through 3 in "To Steam Iron." 2. Hang garment in a location that is not susceptible to damage from heat or moisture. Do not hang in front of wallpaper, window, or mirror. 3. Hold iron about 6 inches away from garment and press and release the Blast Button to steam out wrinkles. Wait at least 3-5 seconds before pressing Blast Button again. 4. To turn iron off, press Temperature Selector. Set Fabric Setting Indicator to OFF. Unplug iron. The iron may be turned off by pressing the Temperature Selector button for 3 seconds. 5. Empty water from the iron following directions in "Caring for Your Iron." NOTICE: Do not allow hot soleplate to touch delicate garments. 5