Hamilton Beach 31337D Use and Care Manual - Page 8

Care and Cleaning

Page 8 highlights

Care and Cleaning w WARNING Electrical Shock Hazard. Do not clean with metal scouring pads. Pieces can break off pad and touch electrical parts. 1 When finished, turn Timer dial to (OFF) and unplug. 2 To clean inside of oven, wipe oven walls, bottom of oven, and glass door with a damp, soapy cloth. Repeat with a damp, clean cloth. For stubborn stains, use a plastic scouring pad. Baking Pan 3 Oven Rack Crumb Tray 4 Wipe outside of oven with a damp cloth. Do not use abrasive cleansers or metal scouring pads. To remove door: Open door; gently pull straight up and remove to clean with hot, To replace door: Align inside of soapy water. Rinse with water door piece with outside door and dry. DO NOT place door piece; gently slide into position. in dishwasher, since this may Door must remain in fully open 5 damage the door and will void your warranty. 6 position during removal and replacement. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

8
Care and Cleaning
To clean inside of oven, wipe
oven walls, bottom of oven, and
glass door with a damp, soapy
cloth. Repeat with a damp, clean
cloth.
For stubborn stains, use a
plastic scouring pad.
To remove door: Open door;
gently pull straight up and
remove to clean with hot,
soapy water. Rinse with water
and dry. DO NOT place door
in dishwasher, since this may
damage the door and will void
your warranty.
To replace door: Align inside of
door piece with outside door
piece; gently slide into position.
Door must remain in fully open
position during removal and
replacement.
Wipe outside of oven with a
damp cloth. Do not use abrasive
cleansers or metal scouring
pads.
2
4
5
3
6
w
WARNING
Electrical Shock Hazard.
Do not clean with metal scouring pads. Pieces can break off
pad and touch electrical parts.
Baking Pan
Oven Rack
Crumb Tray
1
When finished, turn Timer dial
to
(OFF) and unplug.