Hamilton Beach 49976 Use and Care Manual - Page 9
Care and Cleaning - replacement parts
View all Hamilton Beach 49976 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Care and Cleaning w WARNING Shock Hazard. Do not immerse cord, plug, or coffee maker in any liquid. w WARNING Burn Hazard. Failure to allow coffee maker to cool down may cause hot water or coffee to spray from the piercing nozzle. Use caution when cleaning. w CAUTION Cut Hazard. Removable single-serve pack holder has a sharp needle. Piercing needle on underside of lid also is sharp. Use caution when handling. General Cleaning 1. Unplug and allow to cool. 2. Hand wash all removable parts in hot, soapy water. Rinse and dry or wash in TOP RACK only of dishwasher. DO NOT use the "SANI" setting when washing in the dishwasher. "SANI" cycle temperatures could damage your product. 3. Wipe outside of coffee maker with a soft damp cloth. Clogged Needle 1. Unplug and allow to cool. 2. Remove the gray removable needle holder in the lid by turning the arrow from the locked icon ( ) to the unlocked icon ( ). 3. Bend a small paper clip. Insert the tip of the paper clip through the hole of the piercing needle and up into the shaft of the piercing needle to ensure grounds have been removed. 2 4. To replace the gray removable needle holder, insert the tab between the lock icon ( ) and unlock icon ( ) and turn to the right to lock. Routine Cleaning All coffee makers should be cleaned at least once a month (once a week for areas with hard water). To Clean Carafe Side: 1. Plug into outlet. 2. Press the carafe ( ) button. 3. Pour 3 cups (710 ml) of plain white vinegar and 3 cups (710 ml) of cold water into the carafe water reservoir. Place carafe underneath to catch the water/vinegar solution. 4. Press the BREW NOW I/ button once. After 30 seconds, press the BREW NOW I/ button again to stop the brewing and allow the vinegar to clean. After 30 minutes, press BREW NOW I/ button and allow it to finish the brew cycle. When brew cycle is finished, empty carafe and rinse. Run 2 to 3 cycles of cold tap water. The carafe side is cleaned and ready to brew coffee. 5. Unplug. To Clean Single-Serve Side: 1. Plug into outlet. 2. Press the single-serve ( ) button. 3. Pour 3/4 cup (177 ml) of plain white vinegar and 3/4 cup (177 ml) of cold water into the single-serve water reservoir. Place a 14-oz. (414-ml) or larger cup or travel mug underneath to catch the water/vinegar solution. 4. Press the BREW NOW I/ button once. After 30 seconds, press the BREW NOW I/ button again to stop the brewing and allow the vinegar to clean. After 30 minutes, press BREW NOW I/ button and allow it to finish the brew cycle. When brew cycle is finished, empty cup and rinse. Run 2 to 3 cycles of cold tap water. The single-serve side is cleaned and ready to brew coffee. 5. Unplug. 9