Hamilton Beach 49983C Use & Care - Page 5

How to Use Single-Serve Side - Brewing K-Cup®* Packs w WARNING Burn Hazard. To avoid contact with hot coffee or water: • Do not use more than 10 oz. (300 ml) of water for K-Cup®* pack. Adding too much water to the water reservoir will cause an error message to appear in the display, along with a long beep. Place carafe on warming plate. Turn brew selector dial to Carafe ( ) and push BREW NOW button to remove water. Wait for 3 beeps and blue power light to turn off. Restart the Single-Serve process. • Fill reservoir with cup or travel mug of water into which the coffee will be brewed. • Fully insert cup or travel mug under brew basket. • For best results, use K-Cup®* packs sold by Green Mountain Coffee®‡. NOTES: • The unit will only brew on one side at a time. • For Hotter Coffee: Rinse the mug with hot water before brewing. • The Brew Mode selection will stay in the last mode used, unless unplugged. • Coffee may continue to drip after brewing is complete (after 3 beeps) when using finely ground coffee. • Programming mode cannot be used on Single-Serve side. 1 Plug in coffeemaker. Rotate brew selector dial to the right to select Single-Serve ( ). Press BREW OPTIONS button to select . 2 Remove brew basket. Place a pack into the K-Cup®* pack holder. CAUTION! Cut Hazard: K-Cup®* pack holder has a sharp blade. Handle with care. 3 Press down on edge of the pack until the pack snaps into place and hole is punched in the bottom. Do not remove foil. ‡Green Mountain Coffee is a trademark of Green Mountain Coffee Roasters, Inc. Use of the Green Mountain Coffee trademark does not imply any affiliation with or endorsement by Green Mountain Coffee Roasters, Inc. 5 840219700 ENv10.indd 5 4/22/13 2:18 PM