Hamilton Beach 49995RC Use & Care - Page 10

Problem, Probable Cause

Page 10 highlights

Troubleshooting (cont.) PROBLEM Coffee not dispensing. Water reservoir fills too slowly. Failed foil seal. PROBABLE CAUSE • Piercing nozzle is clogged with coffee grounds. Turn unit off; unplug. Allow unit to cool completely. To remove any built-up coffee grounds, insert end of bent paper clip into eye of piercing nozzle. • Unit hasn't cooled down. Allow 2 minutes between brewing cycles. • Try filling water reservoir before pushing down brew basket handle to pierce K-Cup®* pack. Start brewing cycle. • There is variability in the K-Cup®* manufacturing process which causes some types of K-Cup®* packs to be weaker at the seams. Let cool 2 minutes between brewing, use less water, or try a different brand of K-Cup®* pack. 10 840225000 ENv03.indd 10 12/11/12 11:09 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

10
PROBLEM
Coffee not dispensing.
Water reservoir fills too
slowly.
Failed foil seal.
PROBABLE CAUSE
Piercing nozzle is clogged with coffee grounds. Turn unit off; unplug. Allow unit to cool
completely. To remove any built-up coffee grounds, insert end of bent paper clip into eye of
piercing nozzle.
• Unit hasn’t cooled down. Allow 2 minutes between brewing cycles.
Try filling water reservoir before pushing down brew basket handle to pierce K-Cup
®
* pack.
Start brewing cycle.
There is variability in the K-Cup
®
* manufacturing process which causes some types of K-Cup
®
*
packs to be weaker at the seams. Let cool 2 minutes between brewing, use less water, or try a
different brand of K-Cup
®
* pack.
Troubleshooting
(cont.)
840225000 ENv03.indd 10
840225000 ENv03.indd
10
12/11/12 11:09 AM
12/11/12
11:09 AM