Hamilton Beach 52156 Use & Care - Page 4
How to Clean the Blender, Hints for Best Use, Customer Service
View all Hamilton Beach 52156 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
7. Process food or beverages. Place hand on lid when blending liquids. Push button on control panel to start blender. 8. ALWAYS turn blender off and wait until blades have stopped rotating before removing jar. 9. To remove jar after blending is complete, lift the jar straight up. If it is not easily removed, rock gently and lift. Do not twist. 10. NEVER replace jar onto unit while motor is running. How to Clean the Blender 1. Unplug blender from electrical outlet. 2. Wipe blender base, control panel, and cord with a damp cloth or sponge. To remove stubborn spots, use a mild, non-abrasive cleanser. 3. To clean jar, unscrew retaining ring and remove cutting unit assembly from jar. 4. Carefully remove blades and gasket from bottom of retaining ring. 5. Carefully wash blades, retaining ring, gasket, jar (if plastic), and cover in hot, soapy water. Rinse and dry thoroughly. Do not soak. Do not wash blades, retaining ring, gasket, plastic jar, or cover in a dishwasher. 6. Reassemble cutting unit assembly onto jar, replace jar onto blender base. 7. Store blender with cover ajar to prevent container odor. Hints for Best Use • Processing hot foods or liquids in the blender may cause hot liquid to spurt out when the cover is removed. Always remove the filler-cap from the cover before blending hot foods or liquids. • To add foods when blender is operating, remove filler-cap from container cover and add ingredients through the opening. • If blending action stops during blending or ingredients stick to sides of the jar, turn blender OFF. Remove cover and use a rubber spatula to push mixture toward blades. • Do not try to mash potatoes, mix stiff dough, whip egg whites, grind raw meat, or extract juices from fruits and vegetables. The blender is not made to perform these tasks. • Do not store food or liquids in the blender jar. • Avoid bumping or dropping the blender. Customer Service If you have a question about your blender, call our toll-free customer service number. Before calling, please note the model, type, and series numbers and fill in that information below. These numbers can be found on the bottom of your blender. This information will help us answer your question much more quickly. MODEL TYPE SERIES 6 7