Hamilton Beach 62632G Use and Care Manual - Page 3

Parts and Features, How to Use Your Hand Mixer

Page 3 highlights

Parts and Features* To order parts: US: 1.800.851.8900 www.hamiltonbeach.com Canada: 1.800.267.2826 Mexico: 01 800 71 16 100 Speed Control (Press to eject Attachment) Flat Beaters (General Use) Straight Wire Beaters (General/Heavy Use) Bowl Rest™ Attachment (depending on model) Snap-On Case Milk Shake (Ice Cream/Powdered Drink Mixes) Twisted Wire Beaters (General Use) Whisk (Whipping/Aerating) Dough Hooks (Mixing/Kneading) How to Use Your Hand Mixer 1. Make sure Mixer is unplugged and turned to OFF ( ). 2. Following diagram on bottom of Mixer, insert desired Attachment(s) into proper openings on bottom of Mixer. Push to click into place. 3. Plug into outlet. 4. Place Beaters/Whisk into bowl. 5. Move Speed Control to desired speed. Start at 1 and increase speed as needed. 6. When finished, turn speed control to OFF ( ) and unplug Mixer. 7. Push Speed Control or eject button to remove Attachments. Speed Control Button QuickBurst™ Button QuickBurst™ Press and hold down QuickBurst button for additional power at any speed. NOTE: Do not use QuickBurst for more than two minutes at a time or motor may overheat. Bowl Rest™ Use Bowl Rest while adding ingredients or checking a recipe. To use, turn mixer OFF ( ); then set Mixer on edge of bowl. NOTES: •• Never use Bowl Rest when Mixer is on. •• Do not use Bowl Rest on small or plastic mixing bowls. •• Do not lean Beaters against side of bowl. * Appearance may differ from images shown. Not all attachments are included with this model. 840311800_allv03.indd 3 3 12/21/18 11:25 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

3
Parts and Features*
Speed Control
(Press to eject Attachment)
Attachment
(depending
on model)
Bowl Rest
Flat Beaters
(General Use)
Whisk
(Whipping/Aerating)
Snap-On Case
To order parts:
US: 1.800.851.8900
www.hamiltonbeach.com
Canada: 1.800.267.2826
Mexico: 01 800 71 16 100
How to Use Your Hand Mixer
1. Make sure Mixer is unplugged and turned to
OFF (
).
2. Following diagram on bottom of Mixer, insert
desired Attachment(s) into proper openings on
bottom of Mixer. Push to click into place.
3. Plug into outlet.
4. Place Beaters/Whisk into bowl.
5. Move Speed Control to desired speed.
Start at 1 and increase speed as needed.
6. When finished, turn speed control to OFF (
) and
unplug Mixer.
7. Push Speed Control or eject button to remove
Attachments.