Hamilton Beach 67804 Use & Care - Page 4

840095504 ENv01.qxd:840095500 Ev00 9/30/09 1:57 PM Page 4 How to Assemble Read and follow instructions in "Know Your Juice Extractor-Before First Use." 1. Place separator on top of motor base as shown on page 3. 2. Place cutter/strainer into separator and gently push until firmly in place. Once in place, the cutter/strainer should spin easily. 3. Place cover on top of separator and cutter/strainer. 4. Position the top of both safety latches in place; then push in at bottom to lock. Lock both sides. DO NOT OPERATE UNIT UNTIL SAFETY LATCHES ARE LOCKED. 5. Put pulp bin in place. Slide top in first, then bottom, and snap into place. 6. Place a container in position under juice spout. NOTE: Check the pulp bin frequently. It is important to empty the pulp bin when full and to clean out the separator. How to Use w WARNING Laceration Hazard. Never use fingers or utensils other than the food pusher as a food pusher. Food should be placed in food chute only when unit is operating. Food can be continuously placed in food chute without having to turn off unit. 1. For more information, see "Juicing Tips and Techniques." 2. Cut food into pieces to fit the food chute. 3. Plug cord into 120-volt AC outlet. 4. Be sure a juice container and the pulp bin are in place. 5. Push switch up to turn on. The unit will not turn on until safety latches have been closed. 6. Place food in food chute and press down gently and slowly with food pusher. 7. When pulp bin is full, turn unit off. It is very important to empty the pulp bin when full. For best performance, empty pulp bin and clean cutter/ strainer and separator often. 8. When juicing is completed, or when pulp bin or juice container need to be emptied, turn unit off and unplug from outlet. Immediately wash cutter/ strainer according to instructions. 4