Hamilton Beach 67811H Use & Care - Page 4
How to Assemble, How to Use
View all Hamilton Beach 67811H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
840095500 Ev00 1/3/02 3:43 PM Page 4 How to Assemble Read and follow instructions in "Before First Use." 1. Place separator on top of base as shown on page 3. 2. Place cutter/strainer into separator and gently push until firmly in place. Once in place, the cutter/strainer should spin easily. 3. Place cover on top of separator and cutter/strainer. 4. Position the top of both safety latches in place, then push in at bottom to lock. Lock both sides. DO NOT OPERATE UNIT UNTIL SAFETY LATCHES ARE LOCKED. 5. Place pulp bin in place. Slide top in first, then bottom, and snap into place. 6. Place a container in position, under juice spout. NOTE: Check the pulp bin frequently. It is important to empty the pulp bin when full and to clean out the separator. How to Use 1. For more information, see "Fruit & Vegetable Preparation." 2. Cut food into pieces to fit the food chute. 3. Plug cord into 120 volt AC outlet. 4. Be sure juice container and pulp bin are in place. 5. Push switch up to turn on. The unit will not turn on until safety latches have been closed. 6. Place food in food chute and press lightly with food pusher. Never use fingers or utensils other than the food pusher as a food pusher. Food Important Information • The juice extractor is manufactured for NORMAL HOUSEHOLD USE. If you have large quantities, such as 10 pounds or more, process in small batches, allowing motor to cool completely between uses. • When juicing CARROTS, DO NOT PACK food chute. Place carrots in food chute one by one, and use gentle pressure. 4 should be placed in food chute only when unit is operating. Food can be continuously placed in food chute without having to turn unit off. 7. When pulp bin is full, turn unit off. It is very important to empty the pulp bin when full. For best performance, empty pulp bin and clean cutter/ strainer and separator often. 8. When juicing is completed, or when pulp bin or juice container need to be emptied, turn unit off and unplug from outlet. Immediately wash cutter/strainer according to instructions. • DO NOT OVERLOAD THE FOOD CHUTE. For best results, simply drop food pieces, one at a time, into chute. Gently and slowly press with food pusher. This will extract the maximum amount of juice. • If the juice extractor SEEMS TO STRUGGLE or slow down, turn the unit OFF and unplug. Thoroughly wash the cutter/strainer and separator according to instructions. Reassemble and continue juicing.