Hamilton Beach 67840 Use and Care Manual - Page 6

How to Use

Page 6 highlights

How to Use Wash fruits and vegetables. NOTE: Most fruits and vegetables such as apples, carrots, and cucumbers will not need to be cut since they will fit into Feed Chute whole. It is recommended that fruits or vegetables such as oranges, melons, or mangoes are peeled and seeded before placing in unit for best juice flavor. w WARNING Laceration Hazard. Never use fingers to push food down the feed chute or to clear the feed chute. Always use the food pusher provided. 1. Ensure that unit is correctly assembled (see page 5) and place Container with Container Lid under spout. 4. To minimize cleanup, place a plastic grocery bag in Pulp Container to collect pulp. When juicing is completed, simply remove grocery bag containing pulp. NOTE: Do not allow Pulp Container to overfill since this may prevent correct operation or damage the unit. 2. Make sure Switch is in OFF ( ) position. Plug into outlet, and then move Switch to LO or Hl. 3. With the motor running, place food down the Feed Chute. Slide Food Pusher into Feed Chute by aligning groove in Food Pusher with ridge inside Feed Chute to gently guide food down Feed Chute. To extract the maximum amount of juice, always push Food Pusher down slowly. Juice will flow into Container and separated pulp will accumulate in Pulp Container. NOTE: Pulp Container can be emptied during juicing by turning Juice Extractor OFF ( ) and then carefully removing Pulp Container. (Replace empty Pulp Container before continuing to juice.) 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

6
How to Use
w
WARNING
Laceration Hazard.
Never use fingers to push food down the feed chute or to clear the
feed chute. Always use the food pusher provided.
Wash fruits and vegetables.
NOTE:
Most fruits and vegetables
such as apples, carrots, and
cucumbers will not need to be
cut since they will fit into Feed
Chute whole. It is recommended
that fruits or vegetables such as
oranges, melons, or mangoes are
peeled and seeded before placing
in unit for best juice flavor.
1.
Ensure that unit is correctly
assembled (see page 5) and
place Container with Container
Lid under spout.
2.
Make sure Switch is in OFF (
)
position. Plug into outlet, and
then move Switch to LO or Hl.
3.
With the motor running, place
food down the Feed Chute.
Slide Food Pusher into Feed
Chute by aligning groove in
Food Pusher with ridge inside
Feed Chute to gently guide
food down Feed Chute.
To
extract the maximum amount
of juice, always push Food
Pusher down slowly.
Juice will flow into Container
and separated pulp will
accumulate in Pulp Container.
NOTE:
Pulp Container can be
emptied during juicing by turning
Juice Extractor OFF (
) and then
carefully removing Pulp Container.
(Replace empty Pulp Container
before continuing to juice.)
4.
To minimize cleanup, place a
plastic grocery bag in Pulp
Container to collect pulp.
When juicing is completed,
simply remove grocery bag
containing pulp.
NOTE:
Do not allow Pulp
Container to overfill since this
may prevent correct operation or
damage the unit.