Hamilton Beach 68508 Use & Care - Page 4

How to Operate 1. Make sure the unit is unplugged. Place base on clean, dry surface. 2. Hook front housing onto base. 7. Slide bowl into place on base and turn clockwise until it stops at post. This will allow the mixing paddle to mix ice and ingredients once operation begins. 3. Place ice shaving chamber in front housing and ensure it is seated on the shaft. 4. Twist shaft in direction of arrow to lock into position. 5. Place mixing paddle in bowl. 6. If mixing shaved ice with other ingredients, place ingredients in bowl. NOTE: Use serving size markings on bowl as a guide for appropriate ice and liquid levels. NOTE: The cup guide on base may be used to shave ice into bowl or cup other than bowl supplied. 8. Turn selector knob to desired setting. Slushie setting produces finer ice. Snow Cone setting produces coarser ice. 9. Place ice in ice shaving chamber. Do not fill above top rim of ice shaving chamber. 10. Plug cord into outlet. 11. Place lid on front housing and turn clockwise to lock interlock switch (Power Start/ Stop). The unit will start and begin to shave ice.NOTE: It may be necessary to open lid occasionally to redistribute ice. WARNING Cut Hazard • Avoid contact with shaving blade. • Do not use if shaving blade is loose, cracked, bent or damaged. 12. Turn lid counterclockwise to stop. DO NOT shave ice above top ICE line. 13. To remove bowl, turn counter- clockwise, slide out and serve 4 Icy Treat. 840154601 ENv01.indd 4 12/14/12 10:04 AM