Hamilton Beach 68772 Use & Care - Page 8
Troubleshooting
View all Hamilton Beach 68772 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
840210700 ENv04.qxd:Layout 1 11/15/11 1:57 PM Page 8 Troubleshooting PROBLEM Pops will not freeze or are taking too long. I lost my pop sticks, freeze sleeves, and/or funnels. Stick will not sit properly in the sleeve. Pops are stuck in base. PROBABLE CAUSE • Pop base may not have gotten cold enough. Ensure base is placed in freezer for at least 8 to 12 hours before use. Make pops immediately after taking base out of freezer since the unit will begin to defrost as it sits out. • May have waited too long in between batches. • Be mindful of the ingredients used in your pops-anything with too much sugar, oil, alcohol, or fat will not freeze as well as natural juice. • Be sure ingredients are cold when added to the freeze sleeves. • Wash and dry base. Refreeze and try again! • Remember, there may be a small amount of liquid left on the very top surface of the pop. This is normal and does not mean that pops are not frozen. • Please call 1.800.851.8900 in the U.S. or 1.800.267.2826 in Canada to order replacement parts, or visit hamiltonbeach.com in the U.S. or hamiltonbeach.ca in Canada to order replacement parts online. • Make sure sticks are inserted through the funnel attachment and fully seated in the freeze sleeve. • Were freeze sleeves used in base? Ingredients should NEVER be added directly to base. • Are freeze sleeves stuck in base? Moisture may have frozen between base and freeze sleeves. Let base and pops defrost completely. Wash and dry all parts. Try again, making sure base and freeze sleeves are thoroughly dry. 8