Hamilton Beach 70160 Use & Care - Page 3

840083100 EN v03 3/2/01 3:14 PM Page 4 Parts & Features 1. Food Chute 2. Cover 3. S-Blade 4. Control Panel 5. Food Pusher 6. Food Gate 7. Continuous Feed Chute 8. Reversible Slicer/Shredder 9. Slinging Disc 10. Disc Shaft 11. Bowl 12. Center Column 4 How to Operate the Controls ON-OFF-PULSE Switch: This is a three-position switch that gives you a choice of "ON," "OFF," or "PULSE." Selecting the ON position causes the motor to run continuously until you move the switch to OFF. The PULSE position will cause the motor to run only until you release the switch; then it automatically springs back to the OFF position. How to Use How to Assemble Always lock bowl on base before putting blade or disc in position. Make sure blade or disc is securely in place before using. 1. Make sure unit is off and unplugged. 2. Place bowl onto base. Align tabs on bowl with slots on Tab base, as shown. Rotate the bowl clockwise until it locks into place. 3. Insert desired blade. Handle carefully; blades are sharp. S-Blade: Place the S-blade onto center column of food processor in center of bowl. Slicer/Shredder Disc: Place the disc shaft onto center column of food processor. Place reversible slicer/shredder disc onto shaft, desired cutting edge up. 5