Hamilton Beach 70590 Use And Care - Page 5

840170100 Ev03.qxd 7/16/07 10:37 AM Page 5 How to Assemble and Lock the Lid Align lid as illustrated by placing thumb on lid tab and twisting lid clockwise. Four visual alignment markers are provided (see illustration), one on bowl, one on handle and two on bowl lid. NOTE: The food processor will not work unless the lid is locked into position. Food chute lid hinges onto back of food chute. Push down lid to latch onto food chute. Before removing lid, switch to OFF (O) position and wait until blade stops rotating. To remove food chute lid for cleaning, place one hand in food pusher opening and the other on food chute. Rotate hand from left to right and lift up. This will disengage left notch from slot and then right notch from slot. Reverse the directions to place food chute lid back on food chute. How to Operate the Controls The control dial is conveniently located on the front of the base. Rotate the knob clockwise to select a speed: 1 and 2 for Low 3 and 4 for High The processor will run continuously. For instant on and off control, use the PULSE (P) button by rotating knob counterclockwise. 5