Hamilton Beach 70743 Use and Care Manual - Page 6

How to Use Reversible Slicing/Shredding Disc, How to Use Chopping/Mixing Blade

Get Hamilton Beach 70743 PDF manuals and user guides View all Hamilton Beach 70743 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

How to Use Chopping/Mixing Blade (cont.) 8. When finished, turn to OFF ( ) and unplug. w WARNING Laceration Hazard: Always unplug unit before removing lid. 9. Always remove lid before removing bowl to avoid possible damage to the appliance. 10. Remove bowl scraper, if used. 11. Carefully remove blade from motor shaft and bowl from base. How to Use Reversible Slicing/Shredding Disc w WARNING Laceration Hazard. Handle disc carefully; it is very sharp. Make sure control knob is turned to OFF ( ) and unit is unplugged. NOTE: Operate using only one blade or disc at a time. Bowl scraper cannot be used with the reversible slicing/shredding disc. 6 1. Align bowl and base. Turn bowl clockwise to lock into place. NOTE Unit will not work unless bowl is locked. 2. Carefully place disc onto motor shaft with desired side facing UP. ("SLICE" or "SHRED" is stamped on each side of the blade.) 3. Align lid and bowl. Turn lid clockwise to lock into place. NOTE: Unit will not work unless lid is locked.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
How to Use Reversible Slicing/Shredding Disc
6
How to Use Chopping/Mixing Blade
(cont.)
w
WARNING
Laceration Hazard.
Handle disc carefully; it is very
sharp.
Make sure control knob is turned
to OFF
(
)
and unit is unplugged.
NOTE:
Operate using only one
blade or disc at a time.
Bowl scraper cannot be used with
the reversible slicing/shredding
disc.
8.
When finished, turn to OFF
(
)
and unplug.
w
WARNING
Laceration
Hazard:
Always unplug unit
before removing lid.
9.
Always remove lid before
removing bowl to avoid
possible damage to the
appliance.
10.
Remove bowl scraper, if used.
11.
Carefully remove blade from
motor shaft and bowl from
base.
1.
Align bowl and base. Turn bowl
clockwise to lock into place.
NOTE
Unit will not work unless
bowl is locked.
2.
Carefully place disc onto motor
shaft with desired side facing UP.
(“SLICE” or “SHRED” is stamped
on each side of the blade.)
3.
Align lid and bowl. Turn lid
clockwise to lock into place.
NOTE:
Unit will not work
unless lid is locked.