Hamilton Beach 76381 Use & Care - Page 4

840091200 ENv03.qxd 12/13/01 10:13 AM Page 6 Cleaning Your Can Opener 1. Unplug cord from electrical outlet. 2. To remove the cutting head assembly, press release button. 3. Wash cutting head assembly in hot soapy water. Rinse and dry thoroughly. Can also be placed in top rack of dishwasher. 4. Wipe the can opener body and the area behind the cutting head assembly with a damp cloth. Never immerse the can opener in water. 5. To re-assemble, raise lever slightly then slide the assembly onto the body until the release button clicks into place. Remove Re-assemble Hints for Best Use • The can opener will easily open all standard size cans. • If there is a bump, dent, or heavy seam in the rim of the can, open the other end of the can or start cutter just beyond the problem area. • The motor of your can opener is permanently lubricated and will require no oiling. • To use the cord storage on the back of the opener, push in or pull out the cord as needed. • To lock the cord, turn cord sideways and slide up into cord lock slot. • If piercing lever does not move freely, remove and clean the cutting head assembly. Customer Service If you have a question about your can opener, call our toll-free customer service number. Before calling, please note the model, type, and series numbers and fill in that information below. These numbers can be found on the bottom of your can opener. This information will help us answer your question much more quickly. MODEL TYPE SERIES 6 7