Hamilton Beach HMI200 Operation Manual - Page 4

Choosing and Installing Attachments-Cutting Blades wWARNING Pinch and Cut Hazard Make sure that the mixer is off and unplugged before installing or removing attachments and parts. Blades are sharp! Use extreme care when handling. Failure to follow these instructions can result in broken bones, cuts, or other serious injury. The cutting blades can be removed from the stainless steel shaft for cleaning or replacement. The cutter head shaft has left-hand threads to prevent it from coming loose or slipping during operation. 1. Use a 7/32″ wrench or a pair of needle nose pliers to hold 7/32″ Wrench the flat portion of the shaft between the cutter head and the guard. 2. While holding the shaft in place, use a 7/16″ Wrench 7/16″ wrench to turn the blades clockwise to loosen the blades. 3. When reinstalling the blades, thread the cutter head into the shaft counterclockwise, and make sure it is tightened securely in place. Always keep the appliance unplugged during assembly and disassembly. When to use the blades: The cutting blades are used for most chopping, shredding, and mixing operations. To install the cutting blades: 1. Fit the attachment into the end of the motor housing, aligning the three tabs on the blade assembly with the notches in the motor housing. 2. While holding the motor housing in one hand, turn the shaft base clockwise until it locks into place. 4