Hannspree HF257HP User Manual - Page 9
Installation Instructions, Power, User's Manual, Installation, Removal, Power Source
View all Hannspree HF257HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
INSTALLATION INSTRUCTIONS INSTALL REMOVE User's Manual Figure.1. Installing and Removing the Base INSTALLATION: 1. Turn the monitor over and set it upside down. 2. Align the monitor to the slots on the stand. 3. Please note that the longer edge of the stand should be facing forward. 4. Pull the screw ring upwards, then turn the screw clockwise to secure. When the stand is securely attached to the monitor, pull down the screw ring to flatten it with the base of the screw. 5. Check the underside of the stand to ensure that the monitor has been firmly installed to the stand and that the screws do not loosen. REMOVAL: 1. Turn the monitor over and set it upside down. 2. Turn the screw counterclockwise to loosen it. 3. Detach the stand from the monitor. POWER POWER SOURCE: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an Internal universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.) 3. Connect the AC-power cord one end to your LCD monitor's AC-input socket, the other end to wall-outlet. 9