Hannspree ST19DMSB User Manual - Page 31

English 3.1 OSD Setting Menus Follow the instructions indicated on the bottom of the OSD Function Menu. Press CH / CH on the control panel or / arrow keys on the remote control to scroll through the menus. press VOL+ on the control panel or OK on the remote control to select an item and then press MENU to exit the OSD menu. The following menus can be set by different adjustment methods. 3.2 Storing Channels into Memory 1 Press MENU to display the OSD main menu. 2 Press / to select the Channel menu, and then press to enter. 3 Press / to select Air/Cable and use / to select Air or Cable. Air: RF signal programs by air. Cable: RF signal programs by cable. 4 Press / to select Auto Scan, and then press to enter. 5 Press / to select Scan all channels, Digital channel only, or Analog channel only, and press to perform Auto Scan function. To stop scanning, press MENU at any time. 6 The Auto Scan screen will be shown, and after it is done, the screen will return to the first found channel. Channel Air/Cable Auto Scan Favorite Show/Hide Channel No. Channel Label DTV Signal Cable 19 Move OK Enter Return Return Menu Exit Channel Scan all channels Digital channel only Analog channel only Move OK Enter Return Return Menu Exit Channel RF CH : Found : Analog : Digital : 11 00 00 00 Move OK Enter Return Return Menu Exit 30