Hannspree ST251MAB User Manual - Page 33
Adjusting PC Settings, INPUT, Auto Adjust, H Position, Phase, Clock
View all Hannspree ST251MAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
English 3.6 Adjusting PC Settings 1 Press INPUT and select PC as the signal type. 2 Press MENU to enter the OSD Main Menu screen. 3 Press to select the PC menu. 4 Press to enter the PC menu. 5 Press / to select an item. 6 Press / adjust the scales or options settings. Pc Setup Auto Adjust H Position V Position Phase Clock Off 0 0 0 0 Move Select Menu Return 7 Press MENU to return to the PC menu. 8 Press MENU to exit the OSD menu the OSD menu. - The PC menu can be used to adjust the Auto Adjust, H Position, V Position, Phase and Clock settings. • The Auto Adjust can be set to On or Off. • The H Position and V Position can be adjusted by pressing / to move the scales from -16 to 16. • The Clock can be adjusted by pressing / to move the scales from -50 to 50. • Phase can be adjusted by pressing / to move the scales from 0 to 31. 33