Harbor Freight Tools 61415 User Manual - Page 2
Table of Contents
View all Harbor Freight Tools 61415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
SAFETY SETUp Table of Contents Specifications 2 Safety 3 Setup 6 Operation 8 Maintenance 12 Troubleshooting 16 Warranties 18 Parts Lists and Diagrams 20 Specifications Displacement Engine Type Cooling System Fuel Type Capacity Engine Oil Type SAE Capacity Run Time @ 50% Load with full tank Sound Level Bore x Stroke Compression Ratio Rotation viewed from PTO (power takeoff - the output shaft) Spark Plug Type Gap Valve Clearance Intake Exhaust Speed Idle Shaft Shaft Keyway End Tapped 301cc Horizontal Single Cylinder 4-stroke OHV Forced air cooled 87+ octane unleaded gasoline 1.72 Gallon 10W-30 above 32° F 5W30 at 32° F or below 1 Quart 3 hr. 106 dB 80 mm x 60 mm 8:1 Counterclockwise DK7RTC 0.7 - 0.8 mm 0.15 ±0.02 mm 0.20 ±0.02 mm 1950 ±50 RPM Ø1″ x 3.48″ 0.25″ 7/16″ - 20 UNF The emissions control system for this Engine is warranted for standards set by the U.S. Environmental Protection Agency. For warranty information, refer to the last pages of this manual. OpERATION MAINTENANCE Page 2 For technical questions, please call 1-800-520-0882. ITEM 61415