Harbor Freight Tools 62523 User Manual - Page 7

Set Up Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Safety Setup Operation TO PREVENT SERIOUS INJURY AND FIRE: Operate only with proper spark arrestor installed. Operation of this equipment may create sparks that can start fires around dry vegetation. A spark arrestor may be required. The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements. At high altitudes, the engine's carburetor, governor, and any other parts that control the fuel‑air ratio will need to be adjusted by a qualified mechanic to allow efficient high-altitude use and to prevent damage to the engine and any other devices used with this product. Grounding 1. The Generator must be properly grounded in accordance with all relevant electrical codes and standards before operation. Have the unit grounded by a qualified electrician if you are not qualified to do so. 2. To ground the Generator, connect a #6 AWG grounding wire (not included) from the Grounding Terminal on the Control Panel to a grounding rod (not included). The grounding rod must be an earth-driven copper or brass rod (electrode) which can adequately ground the Generator. 3. Refer to local regulations for ground source information. Components and Controls Output Overload Low Oil Combination Switch OFF RUN START LOW OIL OVERLOADTHOREUOSTTCpTLUET pARALLEL OUTLETS Parallel Kit Terminals Spark Plug Access Cover Economy (ESC) Switch Air Filter and Oil Fill Access Panel Exhaust RESET AC 120V RESET Ground Terminal Overload DC 12V Reset Button 120VAC 12VDC Breaker Receptacles Reset Button 12VDC Receptacle WARNING! Follow Parallel Kit instructions for connection and use of a Parallel Kit (Parallel Kit and instructions sold separately). Fuel Cap with Vent OFF RUN START LOW OIL OVERLOADTHOREUOSTTCpTLUET pARALLEL OUTLETS RESET AC 120V RESET DC 12V ITEM 62523 For technical questions, please call 1-888-866-5797. Starter Handle Page 7 Maintenance