Harbor Freight Tools 63024 User Manual - Page 13

Safety Long-Term Storage When the equipment is to remain idle for longer than 20 days, prepare the Engine for storage as follows: 1. CLEANING: Wait for Engine to cool, then clean Engine with dry cloth. NOTICE: Do not clean using water. The water will gradually enter the Engine and cause rust damage. Apply a thin coat of rust preventive oil to all metal parts. 2. FUEL: To protect the fuel tank during storage, fill the tank with with the proper mixture (50:1) of stabilizertreated unleaded gasoline and 2-cycle oil Refer to Checking and Filling Fuel on page 11. WARNING! TO PREVENT SERIOUS INJURY FROM FIRE: Fill tank in a well-ventilated area away from ignition sources. If the engine is hot from use, shut the engine off and wait for it to cool before adding fuel. Do not smoke. 3. LUBRICATION: a. Clean out area around spark plug. Remove spark plug and pour one tablespoon of engine oil into cylinder through spark plug hole. b. Replace spark plug, but leave spark plug cap disconnected. c. Pull Starter Handle to distribute oil in cylinder. Stop after one or two revolutions when you feel the piston start the compression stroke (when you start to feel resistance). 4. STORAGE AREA: Cover and store in a dry, level, well-ventilated area out of reach of children. Storage area should also be away from ignition sources, such as water heaters, clothes dryers, and furnaces. NOTICE: During extended storage periods the Engine must be started every 3 months and allowed to run for 15 - 20 minutes or the Warranty is VOID. 5. AFTER STORAGE: Before starting the Engine during or after storage, keep in mind that untreated gasoline will deteriorate quickly. Drain the fuel tank and change to fresh fuel if untreated gasoline has been sitting for a month, if treated gasoline has been sitting beyond the fuel stabilizer's recommended time period, or if the Engine does not start. Setup Operation Maintenance ITEM 63024 For technical questions, please call 1-888-866-5797. Page 13