Harbor Freight Tools 67501 User Manual
Harbor Freight Tools 67501 - 8 gal. 2 HP 125 PSI Oil Lube Air Compressor Manual
 |
View all Harbor Freight Tools 67501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Harbor Freight Tools 67501 manual content summary:
- Harbor Freight Tools 67501 | User Manual - Page 1
compressor Model 67501 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. Save this manual. Copyright© 2009 by Harbor Freight Tools®. All rights reserved. No portion of this - Harbor Freight Tools 67501 | User Manual - Page 2
14 Troubleshooting 15 Parts List 17 ASSEMBLY DIAGRAM 18 Limited 1 year / 90 day Warranty 19 Specifications 8 Unpacking 8 Instructions for putting 10 General Operating Instructions 11 Emergency Depressurization 12 Automatic Shut off System�� 12 Maintenance And Servicing 13 Cleaning, - Harbor Freight Tools 67501 | User Manual - Page 3
manual, on the labeling, and all other information provided with this product: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid and instructions. Failure to follow the warnings and instructions - Harbor Freight Tools 67501 | User Manual - Page 4
accidentally. c. Store an idle compressor out of the reach of children and do not allow persons unfamiliar with the compressor or these instructions to operate it. A compressor is dangerous in the hands of untrained users. d.Maintain the compressor. Keep the compressor clean for better and - Harbor Freight Tools 67501 | User Manual - Page 5
a.Have your compressor serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the compressor is maintained. Air Compressor Safety Warnings 1. Risk - Harbor Freight Tools 67501 | User Manual - Page 6
information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 19. This product warnings, precautions, and instructions discussed in this instruction manual cannot cover all damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit - Harbor Freight Tools 67501 | User Manual - Page 7
cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal. 4. Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the compressor is properly grounded. 5. Use only 3-wire - Harbor Freight Tools 67501 | User Manual - Page 8
undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible. Instructions for putting into use Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or - Harbor Freight Tools 67501 | User Manual - Page 9
Work Piece and Work Area Set Up Cylinder Head (7) 1. Designate a work area that is clean and well-lit. The work area must not allow access by children or pets to prevent injury. 2. Locate the Compressor on a flat level surface to ensure proper pump lubrication and to prevent damage to the unit. - Harbor Freight Tools 67501 | User Manual - Page 10
(all sold separately). Consult your air tool's manual for needed accessories. low Figure 5 Oil Plug (37). b. Using a funnel to avoid spills, pour enough oil into the Pump Crankcase ( Harbor 1. Check the oil level before operation. Fill the Pump Crankcase (39) with Freight Tools customer service - Harbor Freight Tools 67501 | User Manual - Page 11
oil. General Operating Instructions Read the entire Important Safety Information section at the beginning of this manual including all text and the air hose. 5. Make sure the air tool's throttle or switch is in the off position. 6. Connect the air tool to the air hose. 7. Plug the Air Compressor - Harbor Freight Tools 67501 | User Manual - Page 12
Compressor. 15. Close the in-line Shutoff Valve. 16. Bleed air from the tool then disconnect the tool. 17. Turn the Drain Valve (66), at the bottom of the Tank, two any issues before further use to avoid damage to the compressor. SKU 67501 For technical questions, please call 1-800-444-3353. Page - Harbor Freight Tools 67501 | User Manual - Page 13
Maintenance And Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. tool failure: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. be replaced only by a qualified service - Harbor Freight Tools 67501 | User Manual - Page 14
Every 6 months or 100 Operation Hours: Replace Pump oil.*** Oil Maintenance Check oil periodically for clarity. Replace oil if it appears milky or if debris is present, or every 6 months, or 100 hours of runtime, whichever comes first. In harsh environments such as high heat or high humidity, you - Harbor Freight Tools 67501 | User Manual - Page 15
Problem Compressor does not start or restart Troubleshooting Possible Causes 1. Incorrect power supply. 2. No power at outlet. Reset circuit breaker, or have outlet serviced by a qualified technician. 3. Check that cord is plugged in securely. 4. Turn off Tool. Turn off Compressor and wait for it - Harbor Freight Tools 67501 | User Manual - Page 16
Problem Overheating Possible Causes Likely Solutions 1. Filters need cleaning/replacing Crankcase oil too thin or crankcase overfilled with oil. 2. Crankcase vents clogged. Safety valve needs service. Loose fittings. Defective or rusted tank. 1. Drain oil and refill to proper level with - Harbor Freight Tools 67501 | User Manual - Page 17
PLEASE READ THE FOLLOWING CAREFULLY The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make - Harbor Freight Tools 67501 | User Manual - Page 18
ASSEMBLY DIAGRAM Record Product's Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 67501 For technical questions - Harbor Freight Tools 67501 | User Manual - Page 19
used by a professional contractor or if used as rental equipment). Harbor Freight Tools also warrants to the original purchaser, for a period of ninety death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
 |
 |
2 HP, 8 GALLON 125 PSI
PORTABLE ELECTRIC
AIR COMPRESSOR
Model
67501
SET UP AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2009 by Harbor Freight Tools
®
.
All rights reserved.
No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally.
Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.