Harbor Freight Tools 67501 User Manual - Page 7

equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances. 2. Do not modify the plug provided - if it will not fit the outlet, have the proper outlet installed by a qualified electrician. 3. Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal. 4. Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the compressor is properly grounded. 5. Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the compressor's plug. 6. Repair or replace damaged or worn cord immediately. Grounding Pin 120 V~ 3-Prong Plug and Outlet (for up to 120 V~ and up to 15.5 A) 7. This compressor is intended for use on a circuit that has an outlet that looks like the one illustrated above in 120 V~ 3-Prong Plug and Outlet. The compressor has a grounding plug that looks like the plug illustrated above in 120 V~ 3-Prong Plug and Outlet. 8. The outlet must be properly installed and grounded in accordance with all codes and ordinances. 9. Do not use an adapter to connect this compressor to a different outlet. Symbology Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. V~ Volts Alternating Current A Amperes n0 xxxx/min. No Load (RPM) Revolutions per Minute SKU 67501 For technical questions, please call 1-800-444-3353. Page 7