Harbor Freight Tools 68853 User Manual - Page 9
Work Piece and Work Area Set Up, General Operating Instructions
View all Harbor Freight Tools 68853 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
SAFETY Work Piece and Work Area Set Up 1. Designate a work area that is clean and well‑lit. The work area must not allow access by children or pets to prevent distraction and injury. 2. Secure loose work pieces using a vise or clamps (not included) to prevent movement while working. 3. There must not be objects, such as utility lines, nearby that will present a hazard while working. General Operating Instructions 1. Slide the Direction Switch (which should initially be centered in the "lock" position) to the right for forward drilling/fastening, or to the left for reversing the operation. Use the "reverse" setting only to remove screws or to release jammed drill bit. 2. The LED Work Light can be activated before the Driver runs by pressing the Trigger lightly. Then press the Trigger harder to activate the Impact Driver. 3. The Impact Driver has variable speed. To increase speed, apply more pressure to Trigger. To decrease speed, lessen pressure on Trigger. 4. When finished using the Impact Driver, release the Trigger and center the Direction Switch to lock the trigger mechanism as a safety measure. 5. Remove the Battery Pack. 6. Clean then store the Impact Driver indoors and out of children's reach. SETUP OPERATION MAINTENANCE Item 68853 For technical questions, please call 1-888-866-5797. Page 9