Harbor Freight Tools 97009 User Manual - Page 11
Unpacking, Set Up Instructions, Assembly
View all Harbor Freight Tools 97009 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. Set Up Instructions Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product. WARNING Risk of accidental starting; resulting in serious personal injury. Turn the Power Switch of the tool to its "OFF" position and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagrams near the end of this manual. Assembly 1. NOTE: To assemble and locate the Bandsaw will require additional assistance and a proper lifting device. 2. After the Bandsaw and its accessories are unpacked, make sure its Head is lowered to its horizontal position. (See Figure A.) 3. With a proper lifting device, raise the Bandsaw approximately six inches off the floor surface. (See Figure A.) FIGURE A 4. Once the Bandsaw is lifted, insert the Wheel Rod (92-4) through the two holes located at the bottom/right side of the Stand (77S). Slide one Wheel (92-2) on each end of the Wheel Rod. Place one Washer (92-1) on each end of the Wheel SKU 97009 For technical questions, please call 1-800-444-3353. Page 11