Harbor Freight Tools 97762 User Manual - Page 6
Symbology, Tool Set Up, Workpiece and Work Area Set Up, General Operating Instructions
View all Harbor Freight Tools 97762 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
SAFETY Symbology Double Insulated ETL Standards Association V~ Volts Alternating Current A Amperes WARNING marking concerning Risk of Eye Injury. Wear ANSI‑approved safety goggles with side shields. Read the manual before set-up and/or use. WARNING marking concerning Risk of Fire. Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning Risk of Electric Shock. Properly connect power cord to appropriate outlet. Specifications Electrical Rating Air Flow 120V~ / 60Hz / 1.4A 1590 CFM - High 1380 CFM - Low Model# STFJ-20N Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up OPERATION MAINTENANCE TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before performing any procedure in this section. Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 7. 1. Set the Ventilator on a flat, solid surface. 2. Ensure the Inlet and Outlet grills are firmly and securely in place. 3. Ensure that the switch is in the "OFF" position before plugging the unit in. Workpiece and Work Area Set Up 1. Designate a work area that is clean and welllit. The work area must not allow access by children or pets to prevent distraction and injury. 2. There must not be drapes, paper or other forms of cloth nearby that could be pulled into the inlet part of the ventilator obstructing air flow. 3. Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage. The power cord must reach the work area with enough extra length to allow free movement while working. General Operating Instructions 1. Turn the fan on by moving the switch either to the right, or the left. The positions are noted next to the switch. WARNING! Do not reposition the fan while in use. 2. To prevent accidents, turn off the ventilator and disconnect its power supply after use. Clean, then store the tool indoors out of children's reach. Page 6 For technical questions, please call 1-800-444-3353. REV 12c Item 97762