Harman Kardon AVR 125 Owners Manual - Page 20

20

SYSTEM CONFIGURATION

SYSTEM CONFIGURATION

8.

Press the

Delay Button

on the remote

or front panel. The words

SRDELAY

will

appear in the

Main Information Display

F

.

9.

Press the

Set Button

o

, and then imme-

diately press the

▲

/

▼

Buttons

mq

on the

remote or the

Selector Buttons

5

on the front

panel until the desired delay time for the surround

channels is shown in the display.

10. Press the

Set Button

o

within three sec-

onds after the desired setting is shown.

11. Press the

▲

/

▼

Buttons

mq

on the remote

once so that

CTDELAY

appears in the

Main

Information Display

F

.

12. Press the the

Set Button

o

.

13. Press the

▲

/

▼

Buttons

mq

on the remote

or the

Selector Buttons

5

on the front panel

until the desired delay time for the center channel

appears in the display.

14. Press the

Set Button

o

to enter the set-

ting into the AVR 125’s memory.

Additional Input Adjustments

In addition to the major adjustments described in the

preceding pages, you may also wish to set the type of

audio source (analog or digital) to be used with an

input at this time. Once a specific audio source type is

associated with any of the inputs, it will remain in the

memory until it is changed, even when another input is

selected. To attach one of the digital inputs to a specific

source, follow these steps:

1. Press the

Digital Button

p

.

2. Immediately press the

▲

/

▼

Buttons

mq

or

Selector Buttons

5

to scroll through the list of

available digital inputs or the analog input.

3. When the desired input type is shown in both the


F

and in the

Analog

S

,

Coaxial Digital Input

T

or

Optical Digital

Input

U

Indicators

, press the

Set Button

o

to enter the setting into the unit's memory.

When the Stereo-Direct (Surround Off) mode is in use,

you may only select the analog input for a source.

When the Stereo-Digital mode is in use, you may

select from any of the digital inputs that you have

connected to your source components.

You may also “memorize” a specific surround mode so

that it will always be used when an input is selected.

The AVR 125 always remembers the last surround

mode used with any input, but during the setup

process you may wish to preset the modes for each

source. To do that, follow these steps:

1. Select an input by pressing one of the

Input

Selectors

e

!

or the

AM/FM Tuner

Select

g

.

2. Press the

Surround Mode Selector

j7

, and

immediately press the

▲

/

▼

Buttons

mq

or


7

to scroll through the

list of available surround modes. Note that the

name of each mode will scroll from right to left

across the


F

. To

avoid having the system “time out” and exit the

select process, be sure to press the

▲

/

▼

Buttons

mq

or


7

to

select the next mode at any time the mode name

is displayed.

3. When the desired mode name appears in the

Main

Information Display

F

and in the

Surround

Mode Indicators

, simply pause for a few

seconds to allow the unit to “time out.”Your selec-

tion will be memorized and will be activated each

time the input is selected until another mode is

selected.

4. Repeat the process for each of the inputs.

5. When the desired Surround mode has been

entered for all inputs, press the

Set Button

o

.

Once the settings outlined on the previous pages have

been made, the AVR 125 is ready for operation. While

there are some additional settings to be made, these

are best done after you have had an opportunity to lis-

ten to a variety of sources and different kinds of pro-

gram material. These settings are described on pages

21 through 26 of this manual. In addition, any of the

settings made in the initial configuration of the unit

may be changed at any time. As you add new or dif-

ferent sources or speakers, or if you wish to change a

setting to better reflect your listening taste, simply fol-

low the instructions for changing the settings for that

parameter, as shown in this section.

Having completed the setup and configuration process

for your AVR 125, you are about to experience the

finest in music and home theater listening. Enjoy!

29

35

21

24

21

21

21

21

23

29

Harman Kardon AVR 125 Owners Manual - Page 20

Coaxial Digital Input

Page 20 highlights