Harman Kardon AVR 1510 Quick Start Guide - Page 5

AVR Connections If your TV does not have an HDMI connector: Use a composite video cable (not included) to connect the AVR's Composite Monitor Out connector to your TV's composite video connector. AVR Composite Monitor Out Connector TV Composite Video Cable (not supplied) Note: The HDMI connection to your TV is preferred. If you use the composite video connection to your TV, you will not be able to view the AVR's on-screen menus and will need to use the AVR's front-panel display to set up the AVR. Connect Your Audio and Video Source Devices A source device is a component where a playback signal originates - a Blu-ray Disc™ or DVD player; a cable, satellite or HDTV tuner; etc. Your AVR has several different types of input connectors for your audio and video source devices: HDMI, composite video, optical digital audio, coaxial digital audio and analog audio. The connectors are not labeled for specific types of source devices; they are labeled numerically, so you can connect your devices according to your individual system's makeup. Your AVR's various source buttons have default assignments to different input connectors (listed in the "Default Connector(s)" column of the table below). For ease of setup, you should connect each source device to the connector where the corresponding default source button is assigned (e.g., connect your Blu-ray Disc player to HDMI 2). However, you can connect your source devices as you wish and re-assign any of the input connections to any of the source buttons listed in the table according to where you actually connect each of your source devices. As you connect your various source devices, fill out the "Connected Device" column in the table - it will make it easier for you to assign the various source buttons after you have completed making all of the connections. (You will make any changes to the source-button assignments and fill in the "Assigned Connector(s)" column later in the setup process.) Note: You cannot assign connectors to the Network, Radio, TV and USB source buttons. Source Buttons and Assigned Connectors Source Button Default Connector(s) Assigned Connector(s) MHL (AVR 1710/AVR 171/AVR 1610/AVR 161); Server (AVR 1510/AVR 151) Disc HDMI 1 HDMI 2 Cable/Sat HDMI 3 STB HDMI 4 HDMI 5 Game (AVR 1710/AVR 171/AVR 1610/AVR 161); Composite 2/Analog 2 (AVR 1510/AVR 151) Aux Composite 1/Analog 1 Audio None/Analog 2 Monitor Output Connector HDMI Out 1 HDMI Out 2 (AVR 1710/AVR 171 only) Composite Video Monitor Out Connected Device Connected Device 5