Harman Kardon AVR 7200 Owners Manual - Page 17
AC Power Connections, Switched AC Accessory Outlets, Unswitched AC Accessory Outlet, AC Power Cord - does not turn on
View all Harman Kardon AVR 7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
AC Power Connections This unit is equipped with three accessory AC outlets. They may be used to power accessory devices, but they should not be used with high-current draw equipment such as power amplifiers. The total power draw to each outlet may not exceed 100 watts. The Switched AC Accessory Outlets a will receive power only when the unit is on. This is recommended for devices that have no power switch or a mechanical power switch that may be left in the "ON" position. NOTE: Many audio and video products go into a Standby mode when they are used with switched outlets, and cannot be fully turned on using the outlet alone without a remote control command. The Unswitched AC Accessory Outlet · will receive power as long as the unit is plugged into a powered AC outlet. The AVR 7200 features a removable power cord that allows wires to be run to a complex installation so that the unit itself need not be installed until it is ready for connection. When all connections described above have been made, connect the AC Power cord to the AC Power Cord Jack °. The AVR 7200 draws significantly more current than other household devices such as computers that use removable power cords. For that reason, it is important that only the cord supplied with the unit (or a direct replacement of identical capacity) be used. Once the power cord is connected, you are almost ready to enjoy the AVR 7200's incredible power and fidelity! INSTALLATION AND CONNECTIONS INSTALLATION AND CONNECTIONS 17