Harman Kardon AVR100 Owners Manual - Page 12

Remote Control Functions IMPORTANT NOTE: The AVR 100's remote is shipped from the factory to control all of the functions of the AVR, as well as most Harman Kardon CD, DVD and cassette players. In addition, it may also be programmed to operate many popular VCRs, TV sets, CD and DVD players. Because of the versatility of the remote, each button may have different functions, depending on which product is being controlled. The descriptions shown here describe the function of the buttons for the AVR, as well as the most popular accessory source products. It is important to note that the capability of the remote to control a specific feature of any product other than the AVR depends on many factors, and not all features will work on all products. For complete information on programming the remote control, see page 24. a Device Selectors: Pressing these buttons will perform three different actions at the same time. First, if the AVR is not turned on, pressing the button will power up the unit. Next, it will select the source shown on the button as the unit's input source. Finally, pressing the button will activate the control buttons for the device selected, provided that the remote has been properly programmed. b AM/FM Tuner Select: Press this button to select the AVR's tuner as the listening choice. Pressing this button when a tuner is in use will select between the AM and FM bands. c Main Power Off Button: Press this button to place the unit in the Standby mode. d Sleep Button: Press this button to place the unit in the Sleep mode. After the time shown in the display, the AVR 100 will automatically go into the Standby mode. Each press of the button changes the time until turn-off in the following order: 90 80 70 60 50 min min min min min 40 30 20 10 min min min min OFF Press and hold the button for two seconds to turn off the Sleep mode setting. e Night Mode/Dim Button: Press this button to activate the Night mode. This mode is available in specially encoded digital sources, and it preserves dialog (center channel) intelligibilty at low volume levels. f Tuner Mode: When the FM band is in use, press this button to change between MONO and STEREO modes. When the MONO indicator is lit, all stations will play in the mono mode only. Press the button to turn off the MONO indicator to put the unit an automatic mode which will select stereo when a station is broadcasting in stereo. When the signal strength is weak, press the button to go to the Mono mode for better reception. g Disc-Skip Button: This button does not have any function on the AVR, but it is used with many CD changers after the CD Button a has been pressed to change the disk being played. h DVD Function Buttons: These buttons do not have any function on the AVR, but they are used with many DVD players or changers after the DVD Button a has been pressed to change subtitle, angle or audio mode. They are also used with dual-well cassette or CDR players to select the playback mode. i Play/Up Button: This button does not have any function on the AVR but it is used as the Play or Up/v function with many products. j Title/CDP Button: This button does not have any function on the AVR but it is used with many DVD players as the Title button, and on dual-well CD-R recorders to select the playonly transport. k Stop/Enter Button: This button does not have any function on the AVR but it is used with many products as the "Stop" button or to enter a setting with the on-screen menu system. l Tune Down/Rewind Button: When the AVR's tuner is in use, press this button to tune down through the frequency band in use to select another station. Press the button for a few seconds and then release it to automatically tune to the next station with a signal that provides acceptable reception. This button is also used as the rewind button for many CD players, DVD players, cassette players and VCRs. m Pause/Down Button: This button does not have any function on the AVR but it is used as the Pause or Down/w function with many products. n Preset-Down/Channel-Down Button: When the AVR's tuner is in use, press this button to scroll down through the list of stations that have been entered into the preset memory. When a CD or DVD player is in use, this button is the Skip-Back function. When a VCR or TV is in use, this is the Channel-Down button. o Numeric Keys: These buttons serve as a ten-button numeric keypad to enter tuner preset positions. They are also used to select channel numbers when TV has been selected on the remote, or to select track numbers on a CD, DVD or LD player, depending on how the remote has been programmed. p Speaker Select: Press this button to begin the process of configuring the AVR 100's Bass Management System for use with the type of speakers used in your system. Once the button has been pressed, use the ‹/ › selector buttons r to select the channel you wish to set up. Press the Set button t and then select another channel to configure. (See page 16 for more information.) q Channel-Select Button: Press this button to begin the process of setting the output-level trims when program material is being used as the source. (See page 23 for more information on setting the output level trims.) r ‹/› Select Buttons: These buttons are used to scroll through the list of settings when adjustments are being made to the speaker configuration, delay time settings, digital input selection and other AVR setup procedures. s Test Tone: Press this button to begin the sequence used to calibrate the AVR 100's output levels. (See page 17 for more information on calibrating the AVR 100.) t Set Button: This button is used to enter settings into the AVR 100's memory. It is also used in the setup procedures for delay time, speaker configuration and channel output-level adjustment. u Digital Input Select: Press this button to assign one of the digital inputs ›fi to a source. (See page 20 for more information on using digital inputs.) v Clear Button: This button is used during the process of clearing preset stations from the tuner's memory. (See page 22 for more information on erasing the preset stations.) w Memory Button: Press this button to begin the process of entering stations into the AVR's preset memory system. (See page 22 for more information on the preset memory system.) 11 REMOTE CONTROL FUNCTIONS