Harman Kardon AVR20MKII Owners Manual - Page 10
Video/audio, Output, Jacks, Input, Video, Monitor, Remote, Control, Multi, Front, Center
View all Harman Kardon AVR20MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
■ ■ • II • Ill • • 13. VIDEO/AUDIO OUTPUT (REC) JACKS OF VCR1 Connect these jacks to the corresponding INPUT jacks of a VCR. VIDEO OUTPUT jack: Connect this jack to the VIDEO INPUT jack of the VCR. VIDEO REC jack: Connect these jacks to the AUDIO INPUT jacks of the VCR. 14. VIDEO/AUDIO INPUT (PLAY) JACKS OF VCR 2 Connect these jacks to the corresponding OUTPUT jacks of your VCR or VDP. 15. VIDEO MONITOR JACK Connect this jack to the VIDEO INPUT jack of a TV/MONITOR. 16. REMOTE CONTROL OUT JACK Connect this jack to the "REMOTE IN" jack on a Harman Kardon component. Use one of the accessory mini-plug cables You can control many other Harman Kardon components in your system using the AVR20 II remote commander. 17. MULTI-ROOM REMOTE IN JACK Connect a Harman Kardon HE 1000 remote I.R. sensor to this jack. You can operate the unit by remote commander through the adapter. It is convenient when the unit is located in a separate room. (See page 10) 18. FRONT, CENTER, REAR PRE OUT AND MAIN IN JACKS FRONT PRE OUT When a separate power amplifier is used to drive the front speakers, connect the power amplifier input to these jacks. FRONT MAIN IN When a separate pre-amplifier is connected and this unit is used as a power amplifier, connect the pre-amplifier output to these jacks. NOTE: When you do not use the PRE OUT and MAIN IN separately, always connect the PRE OUT and MAIN IN jacks with a jumper plug. CENTER PRE OUT When a separate power amplifier is used to drive the center speaker, connect the power amplifier input to these jacks. REAR PRE OUT When a separate power amplifier is used to drive the rear speaker, connect the power amplifier input to these jacks. 19. 1/2 SPEAKER TERMINALS Connect the main left (L) and right (R) speakers to the corresponding A and B speaker terminals. Make sure that the positive (+) and negative (-) terminals on the speaker are connected to the corresponding terminals on the receiver. 19A. CENTER SPEAKER TERMINALS Connect the corresponding positive and negative terminals on the center speaker to the positive (+) and negative (-) terminals on the receiver. 20. REAR SPEAKER TERMINALS Connect rear speakers to the corresponding terminals. When you connect the rear speakers, connect both L and R speakers. 21. AC INPUT CORD Plug this cord in AC outlet on a wall. 22. AC Convenience Receptacles Other stereo components may be plugged into the back of your receiver. 1. If a component is plugged into the SWITCHED receptacle, power will be supplied to that component only when your receiver is turned on. 2. If a component is plugged into the UNSWITCHED receptacle, power will be supplied whether your receiver is on or off. NOTE: Do not connect any component that requires more than 100 Watts of power. Check the owner's manual or the back of the component to find it's power requirement. 23. SUBWOOFER OUT When a separate power amplifier is used to drive a subwoofer connect the power amplifier inputs to these jacks. • • 9