Harman Kardon BDS 770 Owners Manual - Page 12
Connecting Your Coaxial Digital Audio Source Device
View all Harman Kardon BDS 770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
BDS 270/BDS 570 Connections Connecting Your Coaxial Digital Audio Source Device If one of your non-HDMI source devices has a coaxial digital output, connect it to the receiver's Coaxial Digital Input connector. NOTE: Make only one type of digital connection (HDMI, optical or coaxial) from each device. Coaxial-Equipped Source Device Connecting Your Analog Recorder Connect an analog audio recorder's inputs to the receiver's Analog Audio Output connectors. You can record any analog audio input signal. Analog Recorder To Coaxial Digital Audio Output To Record Inputs Coaxial Digital Audio Cable (not supplied) Stereo Audio Cable (not supplied) Connecting Your Analog Audio Source Devices Use the receiver's Aux In connectors for up to two source devices that don't have HDMI or digital audio connectors. Analog Source Device Connect an Optional The Bridge IIIP Connect an optional The Bridge IIIP to the receiver's The Bridge IIIP connector. Insert the plug until it snaps into place in the connector. IMPORTANT: Connect The Bridge IIIP only with the receiver's power turned OFF. The Bridge IIIP To Stereo Analog Audio Output Stereo Audio Cable (not supplied) 12