Harman Kardon CA212 Owners Manual - Page 4
hannan/kardon
View all Harman Kardon CA212 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
War gfp% 4,1fi - 4 tiAiefk. Installation Location The locations shown in the above illustration are recommended for the CA212 installation. We recommend purchasing a mounting bracket specifically designed for your car in order to best install this unit. Installation of the CA212 with a mount bracket Securely mount this unit with the four accessory bolts (two for Boll each side) after deciding the mounting position. Install the bracket with the unit mounted S. on the chassis of the car according to the instructions on the accompanying sheet. To install this unit without a mounting bracket, please consult an authorized Harman Kardon Dealer or Service Station. Bracket WARNING: After connecting the power supply wire and speaker wires to CA212, install the unit so that the CA212's terminals will not touch the car chassis. hannan/kardon A Hannan International Company 240 Crossways Park West Woodbury, NY117B7 ,o2 'Lich Power Output, RMS : 12 Watts per channel into 4 Ohms, 20-20,000Hz HCC (High instantaneous : 5A Current Capability) THD : No more than 1% (4 Ohms) Negative Feedback : 35dB Power Bandwidth : 10Hz to 30,000Hz Frequency Response : 10Hz to 100,000Hz +0, -3dB Signal-to-Noise Ratio : 84dB Input Sensitivity/Impedance : 0.1V/0.5V (Switchable)/ 22k Ohms Power Supply : DC +13.8V (11-16V usable), negative ground Typical Input Current Requirements At Idle Full Power Music Signal Full Power Sine Wave 0.3A 1.2A (4 Ohms/ch.) 3.6A (4 Ohms/ch.) Dimensions 7-1/8" x 1" x 5-7/8" (180 x 25 x 149 mm) Chassis Dimensions (W x H x D) 7" x 1" x 5-1/8" (178 x 25 x 130 mm) Weight 21bs. (0.9kg) All specifications and features subject to change without notice. Printed in Japan 1111-J30293 88041