Harman Kardon CD301 Owners Manual - Page 9
Operation, Procedures
View all Harman Kardon CD301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Operation Procedures Tape Playback 1. Turn on your amplifier, turn the volume control to the minimum level and select the tape monitor function on the amplifier according to its owner's manual. 2. Press the POWER switch, and the POWER INDICATOR i lluminates. 3. Press the EJECT button to open the CASSETTE COMPARTMENT door, and insert the recorded cassette tape correctly in the compartment. Incorrect insertion may cause failure in door closing or playback. 4. Press the TAPE SELECTOR according to the type of the using tape. 5. Press the DOLBY NR ON/OFF selector for a tape recorded by using the Dolby NR system. Select the B or C NR type by the NR TYPE selector. 6. Press the PLAY button. The PLAY INDICATOR illuminates and the tape starts to be played back. 7. Gradually turn the OUTPUT LEVEL control and the volume control of your amplifier until the playback sound is heard. 8. Press the PAUSE button for temporary stopping of the tape. Press it again to restart tape playback. 9. Press the STOP button to stop tape playback halfway. 10. Tape running automatically stops when the tape end is reached. Electron€c Auto Search System (EASS) The EASS detects the non-recorded portion between musics and automatically repeats cueing. Operate as follows: 1. Press the ELECTRONIC AUTO SEARCH switch. The mode is automatically P` switched to fast forwarding. When the start of the next music is sensed, the mode is automatically switched to playback and the music is played for about 10 seconds. 2. If the music is the desired one, press the PLAY button, and the EASS is cancelled and tape playback starts. If the PLAY button is not pressed, the mode again returns to fast forwarding and cueing is repeated. 3. The EASS is automatically cancelled when the tape end is reached. Notes: • The EASS is set by pressing the ELECTRONIC AUTO SEARCH switch when the tape is played back or stop- ped. • The EASS mode is cancelled when any button (RE- CORD, REWIND, PLAY, FAST FORWARD, STOP, or PAUSE) is pressed. • If the non-recorded interval between musics is less than about 3 seconds, cueing may be failed. When very low level signal such as pianissimo continues, stopping at the start of the succeeding high level signal may occur. Automatic Repeat System The automatic repeat system is convenient system for automatic repeated playback of a tape after recording or playback to the end of the tape. auto repeat .• Operate as follows: 1. After inserting a cassette tape in the CASSETTE COMPARTMENT, press the AUTO REPEAT button in the ON position. 2. Start tape playback or recording. 3. To repeat tape playback from a desired point, press the RESET button at such point to reset the TAPE COUNTER indication to "000" and then press the MEMORY button. When repeating from the beginning of the tape, release the MEMORY button by pressing it again. 4. At the end of the tape while tape playback or recording, the tape is automatically rewound the beginning of the tape or to "000" position of the TAPE COUNTER indication according to the MEMORY button setting and then tape playback starts automatically. This cycle is repeated until such setting is released. Non-recorded intervals r (more than 3 seconds) 1 EASS button "ON" Fast forwarding Piayback2 IFast forwarding Playback Fast forwarding Press the PLAY button within this period to cause continuous playback. r Playback 9