Harman Kardon HD7525 Owners Manual - Page 4
HD7525, Front, Panel, Controls
View all Harman Kardon HD7525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
HD7525 Front Panel Controls O POWER switch The POWER switch turns the unit on and off: el Compact disc drawer Load a disc (full-size or 8 cm/3-inch) into your compact disc player by placing it in this drawer with the label side up. Open and close the drawer using the OPEN/CLOSE button (3). (i) OPEN/CLOSE button Press this button to open or close the compact disc drawer. The drawer will also close if you press the play button or push the drawer gently toward the chassis of the player; however, we recommend that you do not push the drawer. O REMOTE SENSOR This area receives the signal from the remote control unit. Make sure this area of the front panel is kept free from dirt, or other obstructions that might prevent proper reception of the infrared signal from the remote control. O FUNCTION indicator DISC - This indicator lights when the disc drawer is open, and when a disc is loaded. It does not light when there is no diec. REPEAT - When this indicator is lit, the unit is in REPEAT mode and will contiguously repeat either the entire disc or the programmed sequence. A-B - When this indicator is lit steadily, the unit is set to repeat a specified section of the disc (from A to B). When REPEAT indicator is lit, you have already programmed the starting point (point A) of a section, and the unit is waiting for you to program the ending point of the section (point B). INTRO - When this indicator is lit, the unit is in INTRO SCAN mode and will play only the first 15 seconds of each selection on the disc or in the selected program. FROG - When this indicator is lit, the unit is in PROGRAM mode, in which you can program a sequence of tracks in the order you'd like to hear them, then play back your programmed sequence. SPACE - When this indicator is lit, the unit is in SPACE mode and will insert 4 seconds of space between tracks. O PLAYBACK mode PLAY - This indicator is lit when the unit is playing a track. PAUSE - This indicator is lit when the unit is PAUSE mode (i.e., you have pressed PAUSE to temporarily stop playback). O TRACK indicator When a disc is loaded but not playing, the TRACK indicator displays the total number of tracks on that disc. During playback, the indicator displays the number of the track currently being played. During programming, it displays the number of the track most recently selected. 0 INDEX indicator Some discs that contain very long track may have those tracks subdivided into shorter sections. For example, a long classical piece may be divided into movements, each of which may have an index number. The INDEX indicator displays the nrunber of the subdivision of a track currently being played. If the track has no subdivisions, the INDEX indicator will display a 1 during playback. During program- ming, the INDEX light goes out and the indicator displays the total number of tracks selected in the programmed sequence. O TIME indicator When a disc is loaded but not playing, the TIME indicator displays the total amount of playback time on that disc. During playback, depending on the state of the TIME button (11), the indicator displays one of the following * The time that has elapsed since the beginning of the current track. • The time that remains on the currently selected track. The words REMAIN SINGLE will be displayed if the indicator is in this mode. * The time that remains on either the entire disc or on the programmed selections. The words REMAIN TOTAL will be displayed if the indicator is in this mode. Note that if you have programmed more than 99 minutes in your selection, only dashes will appear in this mode. O DISPLAY button This button turns the display on and off When you turn the display off in PLAY mode, the entire display goes off. In PAUSE mode, most of the display goes off, but the track number is still displayed. In STOP mode, most of the display goes off, but the total number of tracks on the disc is still displayed. In some systems, turning the fluorescent display off may provide the purest possible sound quality during playback. • TIME button During playback or programming, the button cycles through the three TIME display modes • The time that has elapsed since the beginning of the current track. * The time that remains on the currently selected track. • The time that remains on either the entire disc or the programmed sequence. • REPEAT button This button puts your compact disc player in and out of REPEAT mode. In REPEAT mode, the unit will continually play back either the entire disc or the programmed sequence of tracks. Press the button once to turn on REPEAT mode; press again to turn off REPEAT mode. When the unit is in REPEAT mode, the FUNCTION indicator (5) will display the word REPEAT. • PROGRAM button This button puts your compact disc player in and out of PROGRAM mode. Press the button once to turn on PROGRAM mode; press again to turn it off. In PROGRAM mode, you can program a set of tracks to play in any sequence. (For instructions on programming a sequence of tracks, see the Operations section of this manual.) When the unit is in PROGRAM mode, the FUNCTION indicator (5) will display the word PROD in red. 3