Harman Kardon HK 3485 Owners Manual - Page 24
Dim Function, Processor Reset, Memory
View all Harman Kardon HK 3485 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
OPERATION Dim Function Some people find the front-panel messages distracting and would prefer to dim them or turn them off altogether. To dim the display, press the Dim Button on the front panel or remote. Each button press will cycle through the three settings of: VFD FULL: Normal brightness VFD HALF: Display is dimmed but still visible; the light inside the volume knob goes dark VFD OFF: Display goes completely dark except for Power Indicator to remind you that the receiver is turned on Processor Reset If you wish to fully reset the HK 3485 to its factory defaults, or if it behaves erratically after a power surge, first turn the Master Power Switch off and unplug the AC power cord for at least three minutes. Plug the cord back in and turn the receiver back on. If this doesn't help, you may want to try a system reset. NOTE: A system reset erases all user configurations, including tuner presets. After a reset, you will need to re-enter all of these settings. Place the receiver in Standby mode by pressing the Power Switch so that the Power Indicator turns amber. Press and hold the front-panel Mute Button for at least five seconds until the RESET message appears in the display. If the receiver still does not function correctly after a processor reset, contact an authorized Harman Kardon service center for assistance. Service centers may be located by visiting our Web site at www.harmankardon.com. Memory If the HK 3485 is unplugged or experiences a power outage, it will retain user settings indefinitely. 24