Harman Kardon HK330C Owners Manual - Page 5

Other, Functions, Specifications

Get Harman Kardon HK330C PDF manuals and user guides View all Harman Kardon HK330C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

OTHER FUNCTIONS SPECIFICATIONS Monitor: If your tape recorder has a monitoring feature depressing switch will enable you to listen to tapes a second after they are recorded. Contour: Increases bass energy at low volume settings. Less effect as volume level is increased. Mono: Push in to change any program material to monophonic format. Also process single input source through both channels. Phones: Headphone receptacle. Does not automatically defeat speaker systems. SPEAKER FUSE: Protects left and right amplifier circuits from external shorts. If one speaker stops reproducing sound-first check speaker connections for that channel, and then check fuse. Replace blown fuse after correcting external short-such as wire strands touching wrong terminal. Phasing Speakers: Set Function switch to STEREO FM. Tune in a stereo FM station. Then switch the Function switch to FM MONO. The sound should appear to come from a point midway between your speakers. If the sound is not clearly centered, reverse the connections for one speaker at the rear panel. The system should now be in phase. I'm -'-' KR NM NICOL/LAIION SS FM QU ETING CHARACTERISTICS EREO SIN EO.Ill NO EXT. FIT-FE'. STEREO SN SS dB III KLIE FPI PER MONO S/N 6, ilE1 10 100 SPE,PAL LEVEL /0 ANTENNA TERMINALS IN MICROVOLTS ACIPOSS .0 10.C60 STEREO SEPARATION FREQUENCY RIGHT /0 LEFT CHANNEL,' LEI MILLIGENCY ILIII Power Output: 20 Watts Min. RMS Per Channel, both Channels Driven into 8 Ohms from 20Hz to 20kHz, with less than 0.5°/o THD Power Bandwidth: Frequency Bandwidth: Frequency Response: Square Wave Rise Time: Square Wave Tilt: Total Harmonic Distortion: Intermodulation Distortion: From 10Hz to 37kHz at less than 0.5% THD into 8 Ohms, both channels driven simultaneously at 10 watts per channel. From 10Hz to 80kHz From 20Hz to 20kHz ± 0.5dB Less than 5 microseconds Less than 5% at 20Hz Less than 0.5% THD from 250 milliwatts to 20 watts RMS, both channels driven simultaneously into 8 Ohms, from 20Hz to 20kHz Less than 0.3% at rated power output System Hum and Noise: Better than 75dB from phono source. Better than 85dB from auxiliary source (volume control open). Better than 90dB from auxiliary source (volume control closed) [All figure weighted and referenced to full rated output.] Damping Factor: Greater than 30 Input Sensitivity: Phono: 2.8 millivolts Aux: 200 millivolts Input Impedance: Phono: 47,000 Ohms Aux: 20,000 Ohms Overload: Phono: 80 millivolts at 1kHz Aux: Related to volume control setting RIAA Equalization: 1.0dB TUNER SECTION Capture Ratio: 1.8dB Image Rejection: 50dB Spurious Response Rejection: 75dB Alternate Channel Selectivity: 60dB De-emphasis: 75 microseconds IF Rejection: Greater than 60dB AM Rejection: Greater than 50dB FM Distortion: Mono: 0.7% Stereo: 1.0% Dimensions: 15-3/8" W x 13" D x 4-1/2" H (387 mm x 330 mm x 114 mm) Weight: 21 pounds (9.45kg)

  • 1
  • 2
  • 3
  • 4
  • 5
OTHER
FUNCTIONS
SPECIFICATIONS
SPEAKER
FUSE:
Monitor:
If
your
tape
recorder
has
a
mon-
itoring
feature
depressing
switch
will
enable
you
to
listen
to
tapes
a
second
after
they
are
recorded.
Contour:
Increases
bass
energy
at
low
volume
settings.
Less
effect
as
volume
level
is
increased.
Mono:
Push
in
to
change
any
program
material
to
monophonic
format.
Also
process
single
input
source
through
both
channels.
Phones:
Headphone
receptacle.
Does
not
automatically
defeat
speaker
systems.
Protects
left
and
right
amplifier
circuits
from
external
shorts.
If
one
speaker
stops
reproducing
sound
—first
check
speaker
con-
nections
for
that
channel,
and
then
check
fuse.
Replace
blown
fuse
after
correcting
external
short
—such
as
wire
strands
touching
wrong
terminal.
Phasing
Set
Function
switch
to
STEREO
Speakers:
FM.
Tune
in
a
stereo
FM
station.
Then
switch
the
Function
switch
to
FM
MONO.
The
sound
should
appear
to
come
from
a
point
midway
between
your
speakers.
If
the
sound
is
not
clearly
centered,
reverse
the
connec-
tions
for
one
speaker
at
the
rear
panel.
The
system
should
now
be
in
phase.
SS
I'm
KR
NM
NICOL/LAIION
-'-'
EREO
SIN
EO.Ill
NO
EXT.
FIT
-
FE'.
STEREO
SN
SS
dB
III
KLIE
FPI
PER
FM
QU
ETING
CHARACTERISTICS
MONO
S/N
6,
ilE1
10
100
10.C60
SPE,PAL
LEVEL
/0
ANTENNA
TERMINALS
IN
MICROVOLTS
ACIPOSS
.0
STEREO
SEPARATION
FREQUENCY
RIGHT
/0
LEFT
CHANNEL,'
LEI
MILLIGENCY
ILIII
Power
Output:
Power
Bandwidth:
Frequency
Bandwidth:
Frequency
Response:
Square
Wave
Rise
Time:
Square
Wave
Tilt:
Total
Harmonic
Distortion:
Intermodulation
Distortion:
System
Hum
and
Noise:
Damping
Factor:
Input
Sensitivity:
Input
Impedance:
Overload:
RIAA
Equalization:
20
Watts
Min.
RMS
Per
Channel,
both
Channels
Driven
into
8
Ohms
from
20Hz
to
20kHz,
with
less
than
0.5°/o
THD
From
10Hz
to
37kHz
at
less
than
0.5%
THD
into
8
Ohms,
both
channels
driven
simul-
taneously
at
10
watts
per
channel.
From
10Hz
to
80kHz
From
20Hz
to
20kHz
±
0.5dB
Less
than
5
microseconds
Less
than
5%
at
20Hz
Less
than
0.5%
THD
from
250
milliwatts
to
20
watts
RMS,
both
channels
driven
simul-
taneously
into
8
Ohms,
from
20Hz
to
20kHz
Less
than
0.3%
at
rated
power
output
Better
than
75dB
from
phono
source.
Better
than
85dB
from
auxiliary
source
(volume
control
open).
Better
than
90dB
from
auxiliary
source
(volume
control
closed)
[All
figure
weighted
and
referenced
to
full
rated
output.]
Greater
than
30
Phono:
2.8
millivolts
Aux:
200
millivolts
Phono:
47,000
Ohms
Aux:
20,000
Ohms
Phono:
80
millivolts
at
1kHz
Aux:
Related
to
volume
control
setting
1.0dB
TUNER
SECTION
Capture
Ratio:
1.8dB
Image
Rejection:
50dB
Spurious
Response
Rejection:
75dB
Alternate
Channel
Selectivity:
60dB
De
-emphasis:
75
microseconds
IF
Rejection:
Greater
than
60dB
AM
Rejection:
Greater
than
50dB
FM
Distortion:
Mono:
0.7%
Stereo:
1.0%
Dimensions:
15-3/8"
W
x
13"
D
x
4-1/2"
H
(387
mm
x
330
mm
x
114
mm)
Weight:
21
pounds
(9.45kg)