Harman Kardon HKTS 60 Owners Manual - Page 9

HKTS 60BQ Front Left Center Setup Instructions Front Right Front Left Speaker Cable (White Bands) -+ Center Speaker Cable (Green Bands) -+ Front Right Speaker Cable (Red Bands) -+ +- +- FRONT +- SURROUND RIGHT LEFT +- CENTER +- LINE-LEVEL OUTPUTS L R Receiver Surround Left Speaker Cable (Blue Bands) -+ Surround Right Speaker Cable (Gray Bands) PL0004-01001 Subwoofer RCA Cable (Not Supplied) (Red and White Ends) -+ Surround Left Surround Right Connecting the Subwoofer to a Receiver or Preamp/Processor With Line Outputs Use this installation method for receivers and preamp/processors that do not have a dedicated subwoofer output but do have preamp-level (volume-controlled) line outputs. If the receiver or preamp/processor has a dedicated subwoofer output with low-pass filtering, see Connecting the Subwoofer to a Receiver or Preamp/ Processor With a Dedicated Subwoofer Output, on page 8. If you're connecting to a receiver with left and right line outputs that are not connected to amplifier inputs, connect the LFE (purple) connector of the supplied combination LFE and trigger cable to one of those outputs and to either of the HKTS200SUB's Line-Level L/R In Connectors 6. Use a second RCA cable (not supplied) to connect the other receiver or preamp line output to the other of the HKTS200SUB's Line-Level L/R In Connectors 6. the single line outputs. Connect one of the Y-adapter's double ends to the HKTS200SUB's Line-Level L/R In Connectors 6, and connect the other double end to your amplifier's front left and right inputs.  Connect each satellite speaker and the center speaker to the correspond- ing speaker terminals on your receiver or amplifier. Configure your receiver or preamp/processor's setup menu for Subwoofer  ON, and set the front left, front right, center and surround speakers to Small. After you have made and verified all connections, plug the HKTS200SUB's AC Power Cord 8 into an active AC outlet. If you're connecting to a receiver or preamp/processor with left and right line outputs that are connected to amplifier front left and front right inputs, connect 9