Harman Kardon MAS 102 Owners Manual - Page 7
Rear-Panel Connections, Amplifier - speakers
View all Harman Kardon MAS 102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
MAS SYSTEM Rear-Panel Connections Amplifier Right and Left Speaker Output Terminals: Use two-conductor speaker wire to connect each set of terminals to the correct speaker. Remember to observe the correct polarity (positive and negative connections). Input From Controller: Connect the included ribbon cable to this connector and to the corresponding connector on the MAS controller. This cable passes audio signals from the controller to the amplifier, and it transfers DC power from the amplifier to the controller. If this cable is ever damaged, do not use it, and contact Harman Kardon for a replacement. AC Power Input: After you have made all other connections, plug the AC power cord into this receptacle and into an unswitched wall outlet. NOTE: MAS 101/111 systems require 23OV, 50/60Hz AC current. MAS 102 systems require 120V, 60HZ AC current 7