Harman Kardon PA2400 Owners Manual - Page 2
Pa2400, Stereo, Power, Amplifier
View all Harman Kardon PA2400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
■ ■ PA2400 STEREO POWER AMPLIFIER A A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. Congratulations on your choice of the Harman Kardon PA2400 Stereo power amplifier. This Harman Kardon power amplifier has been designed to provide a high performance/cost ratio and all of the sonic benefits assured by Harman Kardon's design philosophy. Much emphasis has been placed on minimizing the effects of the construction on the PA2400's sound quality. High grade capacitors with extremely low loss are used in the power supply and amplifier circuitry. All wires are carefully routed so as to reduce pick-up and crosstalk. Critical grounding points are connected to the chassis by copper thread-cutting screws to guarantee very low resistance. In order to obtain the best performance from the power amplifier, please be sure to read this owner's manual and use the PA2400 only in accordance with its instructions. FEATURES HCC (High Instantaneous Current Capability). This enables the power amplifier to maintain an undistorted output signal when driving low impedance or reactive loads. Ultrawide Bandwidth The bandwidth of the power amplifier is exceptionally wide and is independent of negative feedback. This improves transient accuracy and phase linearity. Low Negative Feedback This unit has been designed to have low distortion and wide bandwidth without high negative feedback. This further improves its dynamic accuracy. Discrete Component Circuitry In order to achieve the above goals, all discrete electronic circuitry has been employed. All available integrated circuits could not provide this level of performance. GENERAL INSTRUCTIONS Always Use at 120V AC This unit is designed for operation with 120V AC. Use only domestic AC outlets. Never connect the unit to an outlet supplying a higher voltage. This may create a fire hazard. (For 230-240 Volt units only) This unit is supplied with a voltage selector enabling selection between 230V and 240V on the rear panel. If the selector is not set to the local voltage, set the selector to the correct voltage with a screwdriver before connecting the power cord to a mains outlet. Handle the power cord gently Do not disconnect the plug from the AC outlet by pulling the cord; always pull the plug itself. Pulling the cord may damage it. If you do not intend to use your unit for any considerable length of time, disconnect the plug from the AC outlet. Do not place furniture or other heavy objects on the cord, and try to avoid dropping heavy objects upon it. Also do not make a knot in the power cord. Not only may the cord be damaged, it can also cause a short circuit with a consequent fire hazard. 1