Harman Kardon SIG1.5 Owners Manual - Page 6

Unpacking and Installation Signature 1.5 Cleaning When the unit gets dirty, wipe it with a clean, soft and dry cloth. If necessary, first wipe the surface with a soft cloth slightly dampened with mild soapy water, followed by a fresh cloth with clean water. Wipe immediately with a dry cloth. Never use benzene, thinner, alcohol or any other volatile cleaning agent. Do not use abrasive cleaners, as they may damage the finish of metal parts. Avoid spraying insecticide near the unit. Moving the Unit Before moving the unit, be certain to disconnect any interconnection cords with other components, and make certain that you disconnect the unit from the AC outlet. Unpacking and Installation The carton and shipping materials used in protecting your new amplifier were specially designed to cushion it from the shocks and vibration of shipping. We suggest that you save the carton and packing materials for use in shipping if you move or if the unit ever needs repair. To minimize the size of the carton in storage, you may wish to flatten it. Carefully remove any staples used to close carton seams; carefully slit the tape on the bottom and collapse the carton. Other cardboard inserts may be stored in the same manner. Packing materials that cannot be collapsed should be saved along with the carton in a plastic bag. When positioning the amplifier in its final location, make certain that it has adequate ventilation on all sides, as well as on the top and bottom. Do not place CDs, record jackets, owner's manuals or other paper on top of, or beneath the unit, or in between multiple amplifiers in a stack. This will block the air flow, causing degraded performance and a possible fire hazard. If the unit is to be enclosed in a cabinet or rack, make certain that there is adequate air circulation, with means provided for hot air to exit and for cool air to be brought in. Typographic Conventions In order to help you use this manual with the front panel controls and rear panel connections, certain conventions have been used. EXAMPLE - (bold type) indicates a specific front panel control or rear panel connection 1 - (number in a square) indicates a specific front panel control ¡ - (number in a circle) indicates a rear panel connection 3